2005 Technical Service Bulletins

[ItsStopher]

Tools, Equipment

 
08/01/2004 TRANSMISSION COOLING SYSTEM SERVICE TOOL, J 45096, TRANSFLOW INFORMATION - REVISED

08/01/2004 DIAGNOSTIC INFORMATION TO ACCURATELY DIAGNOSE A/C LOW PRESSURE SWITCH USING NEW KENT MOORE SPECIAL TOOL GE-47742

09/01/2004 AUTOMATIC TRANSMISSION OIL COOLER FLUSH AND FLOW TEST ESSENTIAL TOOL J 45096 TRANSFLOW - REVISED

10/01/2004 HEM FLANGE REPAIR - REVISED

10/01/2004 SQUEEZE TYPE RESISTANCE SPOT WELDING/EQUIPMENT - REVISED

04/01/2005 REVISED ESSENTIAL TOOL J 35944-200-A ADAPTER FOR 9.525 MM (O.375 IN) AUTOMATIC TRANSMISSION OIL COOLER LINES

05/01/2005 GENERAL MOTORS DEALERSHIP CRITICAL EQUIPMENT REQUIREMENTS AND RECOMMENDATIONS

05/01/2005 INSTRUCTIONS FOR USING GE-47716 VAC-N-FILL COOLANT REFILL TOOL

06/01/2005 ON-CAR BRAKE LATHE SPECIFICATIONS AND MAINTENANCE REQUIREMENTS

08/01/2005 RELEASE OF GM TOOL ORGANIZATION DVD VERSION 8.0

02/01/2006 AUTOMATIC TRANSMISSION OIL COOLER FLUSH AND FLOW TEST ESSENTIAL TOOL J 45096 TRANSFLOW - REVISED

06/01/2006 PROMOTIONAL PRICING ESSENTIAL TOOL CONSUMABLE PRODUCTS - REVISED

10/01/2006 WHEEL ALIGNMENT SPECIFICATIONS, REQUIREMENTS AND RECOMMENDATIONS - REVISED

04/01/2007 SERVICE INFORMATION UPDATE ON CONSOLIDATING THE USE OF GM LIQUID GASKET / ENGINE SEALANTS AND THE NEW SEALANT DISPENSER GE-48326 ESSENTIAL TOOL - REVISED

07/01/2007 INFORMATION ON GM ACR2000 (J-43600) AND NEW REFRIGERANT RECOVERY RECHARGING EQUIPMENT STANDARD SAE J2788

10/01/2007 SERVICE INFORMATION UPDATE ON CONSOLIDATING THE USE OF GM LIQUID GASKET / ENGINE SEALANTS AND THE NEW SEALANT DISPENSER GE-48326 ESSENTIAL TOOL - REVISED

01/01/2008 INFORMATION ON NEW GE-48800 COOLTECH REFRIGERANT RECOVERY / RECHARGE EQUIPMENT

02/01/2008 BRAKE ALIGN SYSTEM FOR BRAKE ROTOR LATERAL RUNOUT CORRECTION - REVISED

02/01/2008 AUTOMATIC TRANSMISSION OIL COOLER FLUSH AND FLOW TEST ESSENTIAL TOOL J 45096 TRANSFLOW - REVISED

04/01/2008 DIAGNOSING ACCESSORY DRIVE BELT / SERPENTINE BELT NOISE AND AVAILABILITY AND USE OF KENT-MOORE EN-49228 LASER ALIGNMENT TOOL - DRIVE BELT

05/01/2008 ANNOUNCEMENT OF PRICE INCREASE FOR MDI (EL-47955)

06/01/2008 ANNOUNCEMENT OF PRICE INCREASE FOR MDI (EL-47955)

06/27/2008 WHEEL ALIGNMENT SPECIFICATIONS, REQUIREMENTS AND RECOMMENDATIONS FOR GM VEHICLES - REVISED

12/10/2008 GENERAL MOTORS DEALERSHIP CRITICAL EQUIPMENT REQUIREMENTS AND RECOMMENDATIONS - REVISED

06/01/2004 J-43600 ACR 2000 ESSENTIAL REFRIGERANT RECOVERY/RECHARGE EQUIPMENT - REVISED

[ItsStopher]

Wheels, Tires, Wheel Bearings, Seals, Hubs

 
08/01/2004 20" WHEELS AND TIRES AVAILABLE THROUGH GMSPO

09/01/2004 PITTING AND BRAKE DUST ON CHROME WHEELS

11/01/2004 REFINISHING ALUMINUM WHEELS - REVISED

11/01/2004 20" WHEELS AND TIRES AVAILABLE THROUGH GMSPO - REVISED

12/01/2004 TIRE PUNCTURE REPAIR PROCEDURES FOR ALL CARS AND LIGHT DUTY TRUCKS - REVISED

01/01/2005 SPARE TIRE IS A DIFFERENT SIZE THAN OTHER TIRES - REVISED

04/01/2005 LOW TIRE PRESSURE, LEAKING CAST ALUMINUM WHEEL - REVISED

04/01/2005 HANDLING CHARACTERISTICS OF VEHICLES WITH 20" WHEEL/TIRE ASSEMBLIES INSTALLED

06/01/2005 COLD TIRE CHARACTERISTICS OF GM ORIGINAL EQUIPMENT TIRES - REVISED

06/01/2005 INFORMATION ON TIRE RADIAL FORCE VARIATION (RFV) - REVISED

08/01/2005 INFORMATION ON PROPER TIRE PRESSURE - REVISED

08/01/2005 20" WHEELS AVAILABLE THROUGH GM ACCESSORIES - REVISED
 
09/01/2005 20" WHEELS AND TIRES AVAILABLE THROUGH GM ACCESSORIES - REVISED

09/01/2005 USE RECOMMENDED TIRE MOUNTING LUBRICANT TO PREVENT TIRES FROM SLIPPING ON CHROME WHEELS

11/01/2005 20" WHEELS AND TIRES AVAILABLE THROUGH GM ACCESSORIES - REVISED

12/01/2005 LOW TIRE PRESSURE, LEAKING CAST ALUMINUM WHEELS - REVISED

12/01/2005 USE OF NITROGEN GAS IN TIRES

03/01/2006 HANDLING CHARACTERISTICS OF VEHICLES WITH 20" WHEEL/TIRE ASSEMBLIES INSTALLED - REVISED

04/01/2006 LOW TIRE PRESSURE, LEAKING CAST ALUMINUM WHEELS - REVISED

06/01/2006 REFINISHING ALUMINUM WHEELS - REVISED

08/01/2006 CHEMICAL STAINING OF CHROME WHEELS - REVISED

08/01/2006 INFO - TIRE CHARACTERISTICS OF GM ORIGINAL EQUIPMENT TIRES - REVISED

08/01/2006 INFORMATION ON PROPER TIRE PRESSURE - REVISED

09/01/2006 SPARE TIRE IS A DIFFERENT SIZE THAN OTHER TIRES - REVISED

09/01/2006 INFORMATION ON PROPER WHEEL CHANGING PROCEDURES AND CAUTIONS

09/01/2006 PITTING AND BRAKE DUST ON CHROME WHEELS - REVISED

10/01/2006 TIRE PUNCTURE REPAIR PROCEDURES FOR ALL CARS AND LIGHT DUTY TRUCKS - REVISED

10/01/2006 WHEEL ALIGNMENT SPECIFICATIONS, REQUIREMENTS AND RECOMMENDATIONS - REVISED

03/01/2006 PROPER USE OF OEM SERVICE WHEEL WEIGHTS, MARRING AND/OR DAMAGE DUE TO USE OF NON-OEM AND/OR INCORRECT WHEEL WEIGHT INSTALLATION

02/01/2007 PEFORMANCE CHARACTERISTICS OF VEHICLES WITH ACCESSORY WHEEL/TIRE ASSEMBLIES INSTALLED AS "UPSIZED" TO ORIGINAL EQUIPMENT- REVISED

03/01/2007 INFORMATION ON PROPER TIRE PRESSURE - REVISED

04/01/2007 INFORMATION ON PROPER TIRE PRESSURE - REVISED

05/01/2007 INFORMATION ON PROPER TIRE PRESSURE - REVISED

08/01/2007 PERFORMANCE CHARACTERISTICS OF VEHICLES WITH ACCESSORY WHEEL/TIRE ASSEMBLIES INSTALLED AS "UPSIZED" TO ORIGINAL EQUIPMENT- REVISED

09/01/2007 TIRE/WHEEL CHARACTERISTICS (VIBRATION, BALANCE, SHAKE, FLAT SPOTTING) OF GM ORIGINAL EQUIPMENT TIRES - REVISED

10/01/2007 INFORMATION ON PROPER TIRE PRESSURE - REVISED

12/01/2007 GM GUIDELINES FOR CHANGING TIRE AND WHEEL ASSEMBLIES

01/01/2008 INFORMATION ON TIRE RADIAL FORCE VARIATION (RFV) - REVISED

01/01/2008 TIRE PUNCTURE REPAIR PROCEDURES FOR ALL CARS AND LIGHT DUTY TRUCKS - REVISED

01/01/2008 LOW TIRE PRESSURE, LEAKING CAST ALUMINUM WHEELS - REVISED

01/01/2008 USE OF NITROGEN GAS IN TIRES - REVISED

02/01/2008 PITTING AND BRAKE DUST ON CHROME WHEELS - REVISED

03/01/2008 MOUNTING, BALANCING AND INSTALLATION OF ACCESSORY WHEELS AND TIRES AVAILABLE THROUGH GM ACCESSORIES

04/01/2008 WHEEL HUB CHANGES - GEN III VS. GEN II

05/01/2008 USE OF CHROME OR CHROME PLATED STEEL VALVE CAPS ON ALUMINUM VALVE STEMS

05/01/2008 TIRE SLOWLY GOES FLAT, TIRE AIR LOSS, LOW TIRE PRESSURE WARNING LIGHT ILLUMINATED, ALUMINUM WHEEL BEAD SEAT CORROSION

05/01/2008 MINIMIZING DAMAGE TO TIRE PRESSURE MONITOR (TPM) SENSORS DURING TIRE MOUNTING/DISMOUNTING

05/01/2008 WARRANTY REDUCTION - TRANSFER OF TIRE PRESSURE MONITORING (TPM) SENSORS TO REPLACEMENT WHEELS AND ALLOWABLE TPM SENSOR REPLACEMENTS

05/01/2008 GM ACCESSORIES WHEEL APPEARANCE STANDARDS

06/27/2008 WHEEL ALIGNMENT SPECIFICATIONS, REQUIREMENTS AND RECOMMENDATIONS FOR GM VEHICLES - REVISED

08/01/2008 REQUIREMENTS FOR CHANGING TIRE AND WHEEL ASSEMBLIES - NEW VEHICLE PLACARD - REVISED

09/01/2008 PERFORMANCE CHARACTERISTICS OF VEHICLES WITH ACCESSORY WHEEL/TIRE ASSEMBLIES INSTALLED AS "UPSIZED" TO ORIGINAL EQUIPMENT- REVISED

09/01/2008 REQUIREMENTS FOR CHANGING TIRE AND WHEEL ASSEMBLIES - NEW VEHICLE PLACARD - REVISED

09/01/2008 GM TIRE WARRANTY PROGRAM CLAIMS SUBMISSION CHANGES

11/26/2008 INFORMATION ON TIRE RADIAL FORCE VARIATION (RFV) - REVISED

11/24/2008 TIRE/WHEEL CHARACTERISTICS (VIBRATION, BALANCE, SHAKE, FLAT SPOTTING) OF GM ORIGINAL EQUIPMENT TIRES - REVISED

01/28/2009 INFORMATION ON PROPER TIRE PRESSURE - REVISED

01/22/2009 USE OF NITROGEN GAS IN TIRES - REVISED

01/01/2009 SPARE TIRE IS A DIFFERENT SIZE THAN OTHER TIRES - REVISED

03/01/2009 WHEEL HUB CHANGES - GEN III VS. GEN II - REVISED

03/26/2009 TIRE PUNCTURE REPAIR PROCEDURES FOR ALL CARS AND LIGHT DUTY TRUCKS - REVISED

03/31/2009 USE OF CHROME OR CHROME PLATED STEEL VALVE CAPS ON ALUMINUM VALVE STEMS - REVISED

04/02/2009 GM TIRE WARRANTY PROGRAM CLAIMS GOODWILL GUIDELINES - REVISED

06/01/2004 SPARE TIRE IS A DIFFERENT SIZE THAN OTHER TIRES - REVISED

06/01/2004 USE OF CORRECT INSTALLATION PROCEDURE FOR LOOSE HUBCAP ASSEMBLY - REVISED

08/01/2004 PLASTIC WHEEL NUT COVERS MISSING AND/OR LOOSE - REVISED

[ItsStopher]

2500