WestNewton
Full Member
Truck was driving great, until I left it outside running for a minute.
Came back out and the engine had stopped and the key was still in the "on" position...
Turned the key off and tried to restart, but had no success. ALSO, fuel gauge and temp gauge were both inoperative.
Found a blown fuse in the engine fuse block, which was a 20 amp VCM/BCM Fuse. The owner's manual says it's the ECM B fuse.
When I replace the fuse, it immediately blows out again as soon as I turn the key?
Any ideas on what is shorting this out?
Thanks!!
Came back out and the engine had stopped and the key was still in the "on" position...
Turned the key off and tried to restart, but had no success. ALSO, fuel gauge and temp gauge were both inoperative.
Found a blown fuse in the engine fuse block, which was a 20 amp VCM/BCM Fuse. The owner's manual says it's the ECM B fuse.
When I replace the fuse, it immediately blows out again as soon as I turn the key?
Any ideas on what is shorting this out?
Thanks!!