CenFL Avalanche
Full Member
- Joined
- Aug 16, 2014
- Messages
- 171
I have two interior accessory items to install on my 2007 Avalanche Z71. One accessory requires switched power (hidden antenna) and the other (dash cam) needs constant power.
In the Center Instrument Panel Fuse Block, below the Body 3 block on the left, there is a unused block with 6 pins. About 3 pins appear to have switched power (confirmed with volt meter). Can I use one of these for the switched power source and is it already a fuse source? Is there an unused ground and constant power source in this fuse block?
I looked through the forum and found one posting, but the pictures are no longer showing online to determine what pins to use.
Thanks in advance!
In the Center Instrument Panel Fuse Block, below the Body 3 block on the left, there is a unused block with 6 pins. About 3 pins appear to have switched power (confirmed with volt meter). Can I use one of these for the switched power source and is it already a fuse source? Is there an unused ground and constant power source in this fuse block?
I looked through the forum and found one posting, but the pictures are no longer showing online to determine what pins to use.
Thanks in advance!