Blkmamba11
New Member
- Joined
- Aug 13, 2018
- Messages
- 2
Hello Avy fans!
New here to the forum and hoping for some insight!
The rig: 2011 LTZ 2WD w/2.5? lift at 4 corners and 33? tires (stock wheels)
Mileage: 185k
New tranny at 170k
Issue: Prominent shudder when coming into load at various speeds/rpm. Generally starting around 30-35 mph all the way up to 55-65. Come off accept and it stops. Pass the peak of gear and it stops.
What I?ve done since start of problem:
-Replaced front and rear u-joints
-Replaced all ball joints
-New sway bar mount bushings and links
-Replaced Rack and pinions and tie rod ends
-New tires with mount/balance and alignment
-New shocks at 4 corners
-New Poly body mount bushings
-New rotors pads and calipers at 4 corners
Not exactly throwing parts at it as with the mileage it all needed to be done anyway. Rides like a dream now but that pesky vibration is driving me insane! Any advice or success stories would be greatly appreciated!!
New here to the forum and hoping for some insight!
The rig: 2011 LTZ 2WD w/2.5? lift at 4 corners and 33? tires (stock wheels)
Mileage: 185k
New tranny at 170k
Issue: Prominent shudder when coming into load at various speeds/rpm. Generally starting around 30-35 mph all the way up to 55-65. Come off accept and it stops. Pass the peak of gear and it stops.
What I?ve done since start of problem:
-Replaced front and rear u-joints
-Replaced all ball joints
-New sway bar mount bushings and links
-Replaced Rack and pinions and tie rod ends
-New tires with mount/balance and alignment
-New shocks at 4 corners
-New Poly body mount bushings
-New rotors pads and calipers at 4 corners
Not exactly throwing parts at it as with the mileage it all needed to be done anyway. Rides like a dream now but that pesky vibration is driving me insane! Any advice or success stories would be greatly appreciated!!