Jimmi Z
Full Member
- Joined
- Jun 4, 2004
- Messages
- 317
After getting my free replacement airlift 1000 bags (lifetime warranty) I noticed all my rear sway bar bushing links are missing worn down and gone I'm guessing. I'm trying to get my 2002 avalanche Z71 6 inch RCD lifted ready for towing a RV I'm planning on buying one soon, probably around a 20 footer and around 6000 pound range or less, already ordered the trans cooler Derale 24 fin, stack type. So I'm thinking of going to polyurethane bushing and chassis mounts for the rear sway bar, anybody here install one yet? I see a bunch on Ebay for other vehicles, looks like I need the 2 chassis mount and 4 bushing ends pieces to complete it and do anyone here know what size diameter is the rear sway bar?
I'm thinking polyurethane so they will last a lifetime and don't have to worry about them again for a while, also my bump stops were gone almost falling apart I found some but the were too short compare to stock had to return them I'm guessing it was 2003 on up.
These seem like the right length it say it's for my vehicle but mine doesn't use a bolt to hold it place just snaps in, do I cut the bolt off? not sure..
These say fits my vehicle..https://www.ebay.com/itm/99-07-Silverado-Sierra-Rear-Axle-Rubber-Bumpers-NEW-GENUINE-GM-PAIR-438/331612425867?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3D667a89b83f7b42d99d8891b7a539fffe%26pid%3D100675%26rk%3D1%26rkt%3D15%26mehot%3Dpp%26sd%3D331612425867%26itm%3D331612425867&_trksid=p2481888.c100675.m4236&_trkparms=pageci%3A98784947-1a01-11e9-9564-74dbd180e9ab%7Cparentrq%3A59b0a9e71680ac1a2348f5a8fff0c434%7Ciid%3A1#vi-ilComp
These are suppose to be the same part, just different material I'm guessing..
https://www.ebay.com/itm/15712438-Dorman-Bump-Stops-Set-of-2-Rear-New-Chevy-Chevrolet-Silverado-523-049/123259154428?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3D667a89b83f7b42d99d8891b7a539fffe%26pid%3D100675%26rk%3D4%26rkt%3D15%26mehot%3Dag%26sd%3D331612425867%26itm%3D123259154428&_trksid=p2481888.c100675.m4236&_trkparms=pageci%3A98784947-1a01-11e9-9564-74dbd180e9ab%7Cparentrq%3A59b0a9e71680ac1a2348f5a8fff0c434%7Ciid%3A1
Thanks
I'm thinking polyurethane so they will last a lifetime and don't have to worry about them again for a while, also my bump stops were gone almost falling apart I found some but the were too short compare to stock had to return them I'm guessing it was 2003 on up.
These seem like the right length it say it's for my vehicle but mine doesn't use a bolt to hold it place just snaps in, do I cut the bolt off? not sure..
These say fits my vehicle..https://www.ebay.com/itm/99-07-Silverado-Sierra-Rear-Axle-Rubber-Bumpers-NEW-GENUINE-GM-PAIR-438/331612425867?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3D667a89b83f7b42d99d8891b7a539fffe%26pid%3D100675%26rk%3D1%26rkt%3D15%26mehot%3Dpp%26sd%3D331612425867%26itm%3D331612425867&_trksid=p2481888.c100675.m4236&_trkparms=pageci%3A98784947-1a01-11e9-9564-74dbd180e9ab%7Cparentrq%3A59b0a9e71680ac1a2348f5a8fff0c434%7Ciid%3A1#vi-ilComp
These are suppose to be the same part, just different material I'm guessing..
https://www.ebay.com/itm/15712438-Dorman-Bump-Stops-Set-of-2-Rear-New-Chevy-Chevrolet-Silverado-523-049/123259154428?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3D667a89b83f7b42d99d8891b7a539fffe%26pid%3D100675%26rk%3D4%26rkt%3D15%26mehot%3Dag%26sd%3D331612425867%26itm%3D123259154428&_trksid=p2481888.c100675.m4236&_trkparms=pageci%3A98784947-1a01-11e9-9564-74dbd180e9ab%7Cparentrq%3A59b0a9e71680ac1a2348f5a8fff0c434%7Ciid%3A1
Thanks