• If you currently own, previously owned or want to own an Avalanche, we welcome you to become a member today. Membership is FREE, register now!

2004 60/40 Rear Seat Trim

2004Slickside

Full Member
Joined
Jan 24, 2017
Messages
600
Hi all,

Had my rear seat out all Winter after new carpet and recovered front seats. Put the front seats back in when it was cold - but waited and just put the rear seat back in today. Unfortunately, it's been so long that I can't seem to remember where some misc. trim pieces go. A real brain fart.

Here they are below. Can anyone please take photos of where and how they go on a 2004. Thanks much in advance. Les

IMG_20210601_185105658.jpg
 
Last edited:
Hi all,

Had my rear seat out all Winter after new carpet and recovered front seats. Put the front seats back in when it was cold - but waited and just put the rear seat back in today. Unfortunately, it's been so long that I can't seem to remember where some misc. trim pieces go. A real brain fart.

Here they are below. Can anyone please take photos of where and how they go on a 2004. Thanks much in advance. Les

View attachment 232672
The 3 black pieces I recognize immediately, the one on the left goes to the front seat, front bolt, and i believe the inside one nearest the console. The other two black pieces cover the electrical connections under the front seat. I'd take pics, but my interior is stripped while I recover the seats.
 
Thanks! I hadn't considered the pieces could be left over from the front seats. I suppose the tan pieces may also be from there.

Good luck on your recovering project. Where did you get you covers from? Got mine from the Seat Shop.
 
Last edited:
I found where the 2 connector covers go and installed them, the small black one went over the front left bolt of the passenger side seat. The large piece is a 15181140 and it goes over the front center bolt of the rear seat. The other two painted pieces are 15040023 and 15040028 (right and left). From diagrams it seems they go in the front of the front seat tracks somehow. That I can't seem to figure out.

Anyone else who has them intact on their vehicle?
 
Last edited:
Could it be this ?

IMG_20210602_124118_3.jpg
 
Don't you just hate it when you finish a project and have parts leftover.😁
 
i
Thanks! I hadn't considered the pieces could be left over from the front seats. I suppose the tan pieces may also be from there.

Good luck on your recovering project. Where did you get you covers from? Got mine from the Seat Shop.
got my covers from leatherseats.com. seems to be great quality. 0843BDDD-AC0E-40D3-88DB-F6722E417009.jpeg
 
Good job!

Mine before reinstallation late last Fall. I did a new driver's seat foam (what a pain to get the material over the new foam and fastened on the lip). Wrinkles in seat cover bottoms resolved as soon as someone sat in the seat for a little while. I'm sure the wrinkles in your top will resolve as well. Looks like a very fresh install on yours.

IMG_20201206_173935353_HDR.jpg
 
Last edited:
Back
Top