09chevyavy
Full Member
So could I just bend the wires so that the diodes are a little away from each other and then make those go into a bullet connector and then attach stranded wire to that and then put that into the DRL and Fog light fuses?
09chevyavy said:So could I just bend the wires so that the diodes are a little away from each other and then make those go into a bullet connector and then attach stranded wire to that and then put that into the DRL and Fog light fuses?
Hey chevyavy, you wouldn't happen to have a picture of your fuse box setup for your raptor lights would you? And where did you get your raptor lights? Any pics?09chevyavy said:I somewhat modded this mod hehehe. I have the grill lights like a raptor. And at night I will turn all my lights off and run just my fogs cuz I can see about 30 yards with those and the streetlights provide enough. But I wanted the grill lights and FT amber DRLs to come on too. So I went from the out left side of the fog fuse to two diodes and into the same right side of the drl fuse so if I turn all the lights on and just hit my fog light button, the fogs, turn signals, drls and grill lights come on
Hey Krazy - is this on an 07+? I have a 13 and would like to go this route. Any more info you can share, pics, etc. would be greatly appreciated.krazycarguy said:how about dont used diodes, which get hot. I used these things called add-a-circuit. Everything is fused, so in the off chance the wires rub thru, its all protected.
Yup! That would be fantastic! Be sure to get me a $$ amount so I can bring it to you!krazycarguy said:That is on my 08. Will you be at nationals? I can bring the stuff to do it, and we can take care of it in the parking lot.