37's and a 6 inch lift

eeaton5 · May 3, 2007

OK I was going to order my body lift today and realized because of my custom pre-runner bar. I wont be able to get the body lift. So I am going to get 37 inch tires anyway. Does anyone have this done on a lift? I'm wondering how much more trimming im going to have to do. I'm OK on the bumper side but I'm worried about the fender side. I know they will fit on straight but when I turn my 35'S they just clear. I need some help. :E:

JT · May 3, 2007

Check with Dewcustom

eeaton5 · May 3, 2007

I tried looking at his pics but because of the fender flares I could not tell about the trimming. I guess I will have to send him a pm.

vlcmstne4 · May 3, 2007

what kind of tires are you going with? its gunna be a squeeze no matter what

eeaton5 · May 3, 2007

I will go with the Nitto Terra Grappler's. But they only come in a 13.5 in wide so Thats why I think I will need to trim a little more.

stingray502 · May 3, 2007

eeaton5 said:
I will go with the Nitto Terra Grappler's. But they only come in a 13.5 in wide so Thats why I think I will need to trim a little more.

Whya are you switching from the mud grapplers to the terra grapplers? I have the terras and love them.

Alaska_AV. · May 4, 2007

Id pop for a refit on the custom pre-runner bar, and do the BL

I've found it far easyer to mount custom stuff after my BL

eeaton5 · May 4, 2007

stingray502 said:
Whya are you switching from the mud grapplers to the terra grapplers? I have the terras and love them.

The noise was wearing on me a little with the mud grappler's. and I drive almost 70 miles a day and don't want to replace my tires every year. I still got almost 26000 miles on the grappler's but I need to get more mileage out of the tires.

eeaton5 · May 4, 2007

Alaska_AV. said:
Id pop for a refit on the custom pre-runner bar, and do the BL

I've found it far easyer to mount custom stuff after my BL

Maybe I can take the AV down to my custom shop and see if they can do something with the pre-runner bar for a body lift.

SupaDave · May 4, 2007

I have the 6 and 3 lift and I am running 37x13.5x20 nitto mudds and my avy is also naked with out the fender flares.I would not recommend installing 37's with out adding the body lift.I rub just a little now.....with out adding the body lift you will rub or have to trim more than you want or tighten the torsion bars which I dont recommend doing either.