4X4 Mountain Decals

chevy03 · May 13, 2003

Hey for all you 4X4 owners, I saw Streamline Design has mountain logo decals for us now. Check it out.

4X4 Mountain Decals

Now the only problem is what color (or colors) decals. I have an '03 charcoal grey metallic.
Any suggestions?

StreamlineDesign · May 13, 2003

You beat me to it!

I finally got them set up yesterday.

Sorry everyone for taking so long to get to them.
It was one unexpected thing after another that caused the delay.

Thanks!
-Rich

shilly · May 13, 2003

Now, if i buy these, how do I remove the factory Z71 Stickers? - Hair Dryer and goo-b-gone??

Here is the link to the Z71 Mountain Decals
http://www.streamlinedesign.com/avalanche/z71_logos.html

chevy03 · May 13, 2003

StreamlineDesign said:
You beat me to it! ?

I finally got them set up yesterday.

Sorry everyone for taking so long to get to them.
It was one unexpected thing after another that caused the delay.

Thanks!
-Rich

Thanks Rich!

I knew you would come through.

Wind4Power · May 13, 2003

Hey those are nice lookin Rich... Great job!

chevy03 · May 13, 2003

I just ordered them.

Silver Mountains/ White 4X4 and Avalanche.

I can't wait!!!

jstrickl · May 13, 2003

shilly said:
Now, if i buy these, how do I remove the factory Z71 Stickers? - Hair Dryer and goo-b-gone??

Here is the link to the Z71 Mountain Decals
http://www.streamlinedesign.com/avalanche/z71_logos.html

They are REALLY easy to remove. I just used a hair dryer (it was winter) to warm and soften them and then used my fingernail to pry a corner. Once you have a corner peeled back, just go S L O W L Y and keep re-grabbing the decal near the surface so it doesn't tear and you have to pick at it again. I put a line of painter's masking tape under the decal so as to have a baseline for the new decal install.

Jamie

shilly · May 13, 2003

Thanks Jamie.
I know I have taken Dealer tags and bumber stickers off with a hair dryer. I really look forward to ordering and receiving my Z71 Decal. These look great.

Steve "shilly"

chevy03 · May 14, 2003

When you put on the new decals, do you have to adjust the placement (up or down)because of the mountains on them?

colonelmotox · May 14, 2003

Follow Jamie's guideline above and they fit just fine- but put that tape on BEFORE you attempt removal of the stock logos. Jamie is correct 100 percent. And these things are GREAT! Caution- DO NOT USE WD-40 to remove. It leaves a petroleum base on the paint and you will never get the new ones to stick properly. Remove, wash area with dish soap, re-wash several times with fresh water, use chamois until you get that 'squeeky' sound of clean and apply new logos. If you use alcohol for cleaning first be sure to get it washed with cold clear water and dry with lint free cloth before applying. Not recommended for application in bright direct sun either [too hot surface].

txyank1 · May 15, 2003

I didn't have any existing decal, so no reference point. Went to Dealer and looked at Z71's (Avs and Pickups) and Z66's then went home and measured and eyeballed, then taped. Took me longer to get the taped alignment done than it did to put the decals (Mountain SS) on. BTW, I bought the installation kit to use. Everything went slick as could be.

tractman · May 15, 2003

I bought the kit with mine too and it made the job effortless......
Tractman

Mdz66 · May 15, 2003

just ordered some z66 decals for the truck hope they turn out great

chevy03 · May 24, 2003

Well, just put on my 4X4 mountain decals. And let me say They are some SWEET looking decals!!

I'll try and get some pics posted soon.

MurmanZ71 · Apr 4, 2004

Streamline design decal on my 03 LPM 4X4.

Murman