• If you currently own, previously owned or want to own an Avalanche, we welcome you to become a member today. Membership is FREE, register now!

belltech

doofive

Full Member
Joined
Dec 14, 2003
Messages
196
Location
Oriskany Falls, NY
i talked to the belltech rep and he said i only needed the spindles (250:cool: and the rear springs (5301).  is that all i need?  doesnt sound right.  i am looking for a 2-3 drop.
 
yellowdoo said:
i talked to the belltech rep and he said i only needed the spindles (250:cool: and the rear springs (5301).? is that all i need?? doesnt sound right.? i am looking for a 2-3 drop.

Yup that's it. Spindles for the front and Springs for the rear!  :B:
 
Yep thats all you need. Shocks arent really necessary till you start going lower than that.
 
If you have a Z-66 with load leveling shocks.. you may need to get the shock relocators. I wasn't paying attention to what AV you have.. so you may not need that.
 
Dune said:
If you have a Z-66 with load leveling shocks.. you may need to get the shock relocators. I wasn't paying attention to what AV you have.. so you may not need that.
:beating: Sig said its a Z71
 
http://store.summitracing.com/egnsearch.asp?Ntt=belltech&N=700+4294908216+4294839913+4294907440+115+4294865493&Ntk=KeywordSearch

There you go.
 
yellowdoo said:
do you have to buy a kit in order to get the 4 inch drop springs for the rear?? or can you just buy the springs.

If you drop lower then 3" you have to have the sway bar relocation kit, $150
FYI--stylinconcepts has the rear springs on sale for $149, summit is more xpensive, free shipping through both
 
luv2customize said:
If you drop lower then 3" you have to have the sway bar relocation kit, $150
FYI--stylinconcepts has the rear springs on sale for $149, summit is more xpensive, free shipping through both
Nope. I had the 4" springs in the rear with no relocator kit.
 
luv2customize said:
If you drop lower then 3" you have to have the sway bar relocation kit, $150
FYI--stylinconcepts has the rear springs on sale for $149, summit is more xpensive, free shipping through both

same here with no relocation kit
 
I suppose. I had the 4" drop springs from Belltech and just wanted another inch. Didnt have any complaints on ride at all with no relocator kit. I would get it for sure on the 5". I think your sway bar might hit the frame if you dont.
 
MR.SMITH said:
I suppose. I had the 4" drop springs from Belltech and just wanted another inch. Didnt have any complaints on ride at all with no relocator kit. I would get it for sure on the 5". I think your sway bar might hit the frame if you dont.

(y)
 
The sway bar actually gets shifted towards the drivers side about 2". Mine was not installed correctly and I broke an endlink from the swaybar hiting the frame. Its all good now.
 
luv2customize said:
What about shocks, need lowering shocks with 4"?
Yep. I would recommend them. I got the Belltech Nitro Active and have been pretty please. Never tried anything else to compare them too.
 
Will aftermarket swaybars need relocation too with lowering or do the fit differently in the first place?
 
ROWYCO said:
Will aftermarket swaybars need relocation too with lowering or do the fit differently in the first place?
Not sure about that. The kit also comes with a bracket to lower your rear trailing arms to get them at the correct angle too.
 
Back
Top