CHAPP0
Full Member
- Joined
- Oct 11, 2020
- Messages
- 26
I have been kicking around different sub box ideas for the last month. In my younger years I worked for a local custom car audio shop and did installs and built subwoofer enclosures. I had looked at building a mid gate box or a under rear seat arrangement but I did not won't to effect mid gate functionality at all. I also wanted a single 10" subwoofer with the proper airspace and to be able to easily remove the box if I was out and needed to use the mid gate.
This is what I'm working on. This will house a single JL Audio 10tw3. The cubic feet I am shooting for is .6 after sub and cutouts displacement are factored in. When I say that this is a tight fit would be putting it loosely. The magnet of this woofer will be barely touching the back of the box. I also was able to incorporate a way to hold the box through the cutouts for the rear glass holder.
I have a lot to do but wanted to post some initial pics. Next step will be building the covers for the hinge and window holders.
This is what I'm working on. This will house a single JL Audio 10tw3. The cubic feet I am shooting for is .6 after sub and cutouts displacement are factored in. When I say that this is a tight fit would be putting it loosely. The magnet of this woofer will be barely touching the back of the box. I also was able to incorporate a way to hold the box through the cutouts for the rear glass holder.
I have a lot to do but wanted to post some initial pics. Next step will be building the covers for the hinge and window holders.
Attachments
-
sub box 1 cutout jig.jpg111 KB · Views: 26
-
Sub box 2.jpg106.1 KB · Views: 21
-
Sub Box 3 Window Holder jig.jpg88.8 KB · Views: 23
-
Sub Box 4 Window Holder spacing.jpg176.7 KB · Views: 23
-
SubBox 5 Hinge cutout.jpg115 KB · Views: 25
-
Subbox 6 Sideview.jpg130.2 KB · Views: 27
-
Subbox 7 Cutouts fit.jpg104.2 KB · Views: 27