• If you currently own, previously owned or want to own an Avalanche, we welcome you to become a member today. Membership is FREE, register now!

Electrical Bugs After Stereo Change

Jcamort12

New Member
Joined
Dec 30, 2021
Messages
1
OK here goes, I went to install a new back up camera because our avalanches have huge Blindspot‘s when you’re going in reverse.. Mass of splicing and soldering but I did get the new deck to work. However now my back up lights don’t work my dome light is out and my transmission is acting like it doesn’t have a first and second gear. No power w/low rpm’s
Thoughts on possible fixes?
 
First welcome to the website!
It helps if you provide more info on you AV such as year and model etc. As a general rule if problems occur from doing a mod the first step would be to try and disconnect what you have done and then see if things return to normal.
Without seeing photos and step by step info on where you connected everything it will be hard (even for some of the site electrical gurus) to diagnose what should be done to correct things.
That is why we advise in older threads about stereo mods to contact customer service people at www.crutchfield.com before you buy so they can set you up with the right head unit and all wiring adapters you need to keep your functions. One stop shopping done right.
Good luck with your troubleshooting.
 
un do what you did first.

No way to know what is wrong as way too many things possible if you went splicing into factory harness.
 
Back
Top