ftdrl's HELP!!!!!!!!!

[fyabug]

HELP
I am in the process of doinf the ftdrl mod right now and I am doing the one wire mod......I got the green block out .....but how do you get the pin with the blue wires out......do u need a special tool

 

[dhaluzak]

No special tools are needed. Take a look at the first post of this thread. It should help you out a lot.

You can also go here to get answers and how-to's for just about every mod out there.

Hope this helps,
Dan

 

[sbutch6969]

Did you pull the blue pins out of the side of the green block?

If so....looking at the rear of the block, find the hole with the corresponding wires you want to remove, take a small (Very small) screw driver and gently push it between the end of your wire clip and the little pin holding the clip in place. While doing this gently pull back on the wires and you should be able to lift it right out. Guess it sounds easier then it is...don't let me confuse you. The link Grandpa offered up has all of the details. Good luck and let us know if you need more help.

SB