rockalanche
Full Member
Just greased my 04 AV. at 6200 miles .. I found 11 fittings... One fitting is impossible to get the grease gun on. I pulled that straight fitting out and installed a 90 degree angle one - 6mm thread.. Now it is easy to get to... I put 3 squeezes of the grease gun into each fitting. I could barely see any of the seals grow bigger as I did this.. But there was definate pressure on the handle when I squeezed it the last 3 inches or so...
I used Mobil 1 synthetic grease- ngci cat 2 GC-LB.. Red color where the grease in the fittings now appears to be a whitish color..
FYI
The Rock
I used Mobil 1 synthetic grease- ngci cat 2 GC-LB.. Red color where the grease in the fittings now appears to be a whitish color..
FYI
The Rock