Hi I am new to this forum, and I am looking for some help matching up the factory radio harness with the lighting schematic I have drawn for the OEM changer faceplate. I have already swapped out the dash LEDs and Climate Control lighting with great results, but the radio faceplate itself consisted of 6 series/parellel combinations. I have traced these out, and my diagram may be of use here, but I need to know which pin is positive and which is negative. Attached is a hand drawing of the lighting circuit inside the 6 CD changer faceplate as viewed from the front of the unit (connector is reversed from this view)
I can use 5v LEDs head to tail in sets of 3 to complete the series parellel combinations, but they must have the correct polarity. Has anyone else attempted this mod?
<img>https://photos.app.goo.gl/ibvXtjHajDQjeP5FA</img>
I can use 5v LEDs head to tail in sets of 3 to complete the series parellel combinations, but they must have the correct polarity. Has anyone else attempted this mod?
<img>https://photos.app.goo.gl/ibvXtjHajDQjeP5FA</img>