• If you currently own, previously owned or want to own an Avalanche, we welcome you to become a member today. Membership is FREE, register now!

Lifted Nation

Yeah i love the way that bumper sits high - it shows off the front tires really nice. Unlike our cladded bulky bumpers, no matter how big of a tire you go from the front it will still be quite hidden.

IMG_20140929_201112.jpg
 
Thanks! and the bumper is made by N-Fab, It's their RSP Replacement Bumper for 03-06 Silverado, and custom fit on a cladded AV. Lots of body and frame modification.
 
RedVictoryZ71 - any chance you could take some pictures of the bumper mounting?
 
msvance said:
RedVictoryZ71 - any chance you could take some pictures of the bumper mounting?

Not the greatest picture, but you can see where i cut the top of the frame to allow the bumper to slip over the end of it and drill new holes.
 
I guess I can officially add my name to  the list on the Lifted Nation.
Your post and pictures made me do it... at least that's what I am telling the wifey.

 

Attachments

  • IMG_3751.JPG
    IMG_3751.JPG
    42.8 KB · Views: 450
VBHOLLIC said:
I guess I can officially add my name to  the list on the Lifted Nation.
Your post and pictures made me do it... at least that's what I am telling the wifey.

Lifted - that's the way to live ;)
 
Alright so here's mine, it's definitely not as big as a lot of the avy's on here but I like it and at 19 it was what I could afford. 3 3/4" lift in the front (UCA bump stops cut off) 2" coil spacer in the rear. 265 75 16 (measure out to about 32.5") goodyear wrangler duratrac which is what i stuck with because of my 3.42 gears.

Before:
IMG_20140121_161212_zpsbfd6e52c.jpg


After lift:
IMG_20150118_1405131_zps43b153ca.jpg
 
2006chevboy said:
Alright so here's mine, it's definitely not as big as a lot of the avy's on here but I like it and at 19 it was what I could afford. 3 3/4" lift in the front (UCA bump stops cut off) 2" coil spacer in the rear. 265 75 16 (measure out to about 32.5") goodyear wrangler duratrac which is what i stuck with because of my 3.42 gears.

Before:
IMG_20140121_161212_zpsbfd6e52c.jpg


After lift:
IMG_20150118_1405131_zps43b153ca.jpg
Ya done good with it.  (y)
 
VBHOLLIC said:
I guess I can officially add my name to  the list on the Lifted Nation.
Your post and pictures made me do it... at least that's what I am telling the wifey.

I want my truck to have that same set up  (y)
 
Hey Speedfreak95, I notice in your info on the post there you are wanting a 50inch LED bar? I sell them! If you want you can pm me and we can maybe get you hooked up
 
09chevyavy said:
Hey Speedfreak95, I notice in your info on the post there you are wanting a 50inch LED bar? I sell them! If you want you can pm me and we can maybe get you hooked up

Appreciate you looking out! Already got one  (y)

Attached the pic.. I'm terrible at pictures on here.. All I need now is the lift.. Just can't pull the trigger
 

Attachments

  • image.jpg
    image.jpg
    31 KB · Views: 342
Speedfreak95 said:
Appreciate you looking out! Already got one  (y)

Attached the pic.. I'm terrible at pictures on here.. All I need now is the lift.. Just can't pull the trigger
Looks good bud! i think most of us can add that all I need now is the lift  (y) :laugh:
 
Dakotawilk said:
Looks good bud! i think most of us can add that all I need now is the lift  (y) :laugh:

Yeah haha... Ive been looking at either the 6inch procomp or the 5 inch rough country.. I like the 7.5 rc but heard it puts the cv at a bad angle.. i need to do some more research. Its a 2wd truck so it would mostly be for looks my quad is for the mud  (y)
 
Not huge, but lifted just the same, lol.

Traxda lift, Nitto tires and Bilstein 5100 shocks.

 

Attachments

  • driver side before.jpg
    driver side before.jpg
    89.6 KB · Views: 276
  • driver side after.jpg
    driver side after.jpg
    90.3 KB · Views: 276
I do have to admit, if the yellow was available in 02, I would've gotten a yellow NFE.
 
Back
Top