familyman77
New Member
- Joined
- Apr 16, 2016
- Messages
- 2
Greetings all, this is my first post on the site and as I'm sure is often the case with newbs, I'm looking for help. I have an 07' LS that I just upgraded with factory fog lights. I pulled a VIN from a 10' LT to use for ordering the wiring harness from GM Parts Direct.
All went well except for the two remaining plugs on each side just below the headlights. Still not sure what those are for, but everything else was plug and play. The only other difference in the harness was the ambient air temp sensor wiring ruins up the passenger side instead of the driver's side where it was originally.
Before reassembly I tested everything, all was good. So I thought. Seems I didn't notice the "OC" on the mirror where the temperature should be. I know that the "OC" stands for open circuit, but everything is good. Even replaced the temp sensor and my mirror still reads "OC".
Anyone else run in to this issue who's figured it out that might be able to shed some light?
Thanks in advance!
All went well except for the two remaining plugs on each side just below the headlights. Still not sure what those are for, but everything else was plug and play. The only other difference in the harness was the ambient air temp sensor wiring ruins up the passenger side instead of the driver's side where it was originally.
Before reassembly I tested everything, all was good. So I thought. Seems I didn't notice the "OC" on the mirror where the temperature should be. I know that the "OC" stands for open circuit, but everything is good. Even replaced the temp sensor and my mirror still reads "OC".
Anyone else run in to this issue who's figured it out that might be able to shed some light?
Thanks in advance!