Need Zaino advice

[peej80]

Hello to all,
I need a little advice regarding the use of Zaino. I have an '03 Av that is summit white and last October, I applied 3 coats of Zaino as instructed. I washed with Dawn and clayed the paint and was real happy with the results. I live in Montreal and winter comes swift and hard and do not have a garage to wax in during the winter months. All I do in the winter is have it hand washed. Now that spring is around the corner and have noticed the water beading less and also some tar specs on the paint, do I have to start the whole Zaino application process again? Any helpful comments would be greatly appreciated.

Thanks,

Peej80

 

[MacMan]

Just wash and reapply polish. One or two coats will do. Then just enjoy the shine again!

 

[OviedoAV]

I second Macman! That is what I do.

 

[otisboy]

I third the advice from MacMan. No need to go through the entire process again. Just wash, clay, apply polish, and gloss enhancer.

 

[aetatis]

Don't forget the detailer spray with your kit (z6 I believe)

It really comes in handy to maintaining that zaino shine!
If you read the bottle it has a uv screening promoter and
has an anti-static chemical in it (Makes dirt wipe off easier!)

Didn't know we had any members in quebec!
Je me Souviens!

Aetatis.

 

[RichUF]

speaking of Quebec, I passed someone in a white AV on I-4 near downtown Orlando yesterday...no ambers...family in back watching a movie. Plates were Quebec.

Oh wait, scratch that, it was Ontario my bad

 

[ygmn]

remove tar first.....then wash....dry...examine paint for contaminates....plastic baggy test here...this will tell you if you need to clay again....

then apply either Z1 or ZFX+ Z? in those spots where you removed the tar...as tar removers tenbd to remove Zaino...

then apply fave Z to paint...one or 2 layers should suffice.....



The rest of the paint just

 

[fireeater]

remove tar first.....then wash....dry...examine paint for contaminates....plastic baggy test here...this will tell you if you need to clay again....

then apply either Z1 or ZFX+ Z? in those spots where you removed the tar...as tar removers tenbd to remove Zaino...

then apply fave Z to paint...one or 2 layers should suffice.....



The rest of the paint just

You been drinking again ygmn?

 

[GoldBowTie]

I third the advice from MacMan. No need to go through the entire process again. Just wash, clay, apply polish, and gloss enhancer.

I believe that is the entire process and is what I would do.