DKraim
New Member
I have been debating on what to do for the rusted passanger rear fender. After Pulling the cladding off i found out the previous owner bondo and fiber-glassed it and now has rust under. So far i have sanded and cut out the junk but there was a good chunk that needs to be replaced now. My question is without replacing the whole rear fender should i fabricate and weld a couple patches or just put the cladding back on and let it buck. MN SALT STINKS Also can't find any in the junk yard worth grabbing a patch. Perfer doing the patch.
Any thought would help!
I definatly need to add some photos and working on how to go about that. Otherwise click on my user name and check albums
Any thought would help!
I definatly need to add some photos and working on how to go about that. Otherwise click on my user name and check albums
Last edited: