Sail Panel LED'S (Simplified-instructions and details only please)

[itsstopher]

3/4 in leds 

 

[angshan]

Oh I like those. 

 

[angshan]

Has any one done this mod on an AV with the painted sail panels? Mines a 2011 with the ext sails etc. there isn't any clips and what not to put the leds into.

 

[MS03 2500]

Has any one done this mod on an AV with the painted sail panels? Mines a 2011 with the ext sails etc. there isn't any clips and what not to put the leds into.

If you are brave you could drill holes for them.

 

[angshan]

If you are brave you could drill holes for them.

Thought about it but was hoping to see it done before I did any drilling.

 

[MS03 2500]

Good my motto is Have Drill and I'm not afraid to use it, but even I would not do that just for sail panel lights.

 

[wyotonka]

I've always wondered if you could use the single smd dots and slip them through the seam
They appear to have a flat wire and are weatherproof
https://www.superbrightleds.com/moreinfo/led-wired-bolts/little-dot-smd-led-accent-light/639/

 

[Vaeagleav]

For those with EXT type cladding maybe something like the old Southern Comfort light strips would work without drilling? Here is a strip that may work instead of trying for individual lights :

http://www.customdynamics.com/truflex_flexible_led_lighting.htm

 

[angshan]

Hmm. Definitely need to look into something like that.

 

[Linescreamer]

I have black sail panels with light bars if you're interested in purchasing a pair.

 

[moosc]

Anyone done this lately.

 

[Hug_R_Av]

Sounds like I might be lol

 

[Rassilon]

I'm tempted too.

 

[BlackOpSoldier]

I think I did a write-up when I did my 05 back in 04. I used the led bolts for license plates with hela coils to add a little girth. I then connected the wires to the third break. Making them act as extra brake lights.