• If you currently own, previously owned or want to own an Avalanche, we welcome you to become a member today. Membership is FREE, register now!

Sail Panel Plexi-glass Window

G

got_change

GUEST
why do we mod? to be a little different from the next guy?? To get more power??? for that certain look ?If I mod do you want the same one. i think some modsshould not be hoarded, but shared,especially with club members so here goes ?1 ?One of my first mods was to put plexiglass in the sail panel cut outs ?they are just siliconed in have been on for months have been tested to 98 mph and set the truck off a little bit. The hardest part was to make a template to take to the plexi (sign) shop I'll mail a tracing of the template to any av clubber that want it. If the club decal was made small enough to fit these ?I'd put a set on each side ?I just cant bring myself to put it in the rear window. ?my mod your mod????? ? I guess the way to get an address is to e mail address to got changes e.mail You can kinda see the panels on avalanche pictures av mods and pictures by got change
 
What if you fit the plexiglass between the two pieces that make up the rear sails? (plexiglass sandwiched in the seam)

I'd assume you'd have to trim one of the sides down the thickness of the plexiglass so that it'd fit back together correctly....
 
marc i tried that first and it was half past a nightmare the pieces fit in against that lip and both sides are not quite the same but its an easy mod if you just silicone in the plexi it wont fit between the panels
 
here are pictures of the sail panel plexi window mod
 

Attachments

  • IM000083.jpg
    IM000083.jpg
    52.4 KB · Views: 192
got_change:

I think your sail panels look beter than the ones that come with the snuggie. Great job ;D. I just happen to have some of that smoke plexiglass in my garage ... I've seen alot of pics of your mods. You indeed have a unique and very cool AV.
 
Those panels do have a slick look. If you still have the template, do you have access to a digital scanner to make a jpg image (or two if the size is too big for a scanner)?
 
thats the secret to get this mod out there in other av owners hands the ez way I just stumbled across topic about snugtop windows and still stumble aroun the club site looking for cool stuff. goo929 helped me realize the topic name should beez and correct to topis .... somehow if it was...a for avalanche b for battery c for chrome d.for door edge guards i could find stuff faster. im gonna digitize the template and post it thanks for telling me about this
 
I would be interested for sure in the specs. Don't know who would do it here, but I'll find somebody.

I've also been thinking about the center bar on the grille. I have already painted much of the cladding, but the guy that did that was very suspect about painting the cross piece. Did not think it would last.

I'm going to go to a sign anf decal company. I'm thinking some dark (smoke) decal material might do the job very well.
 
spark, i got a small rock ding on the chrome grill strip and when i pressure washed it it blew off a quarter size strip of the chrome over teh gray plastic I think I'll try for warranty first and then if i dont get a new on ,pull the grill again (ist time for the aircraft landing light install} and try to low all the chrome off. I saw a black av picture here on the club site and it looked fantastic!!!
 
got_change said:
spark, i got a small rock ding on the chrome grill strip and when i pressure washed it it blew off a quarter size strip of the chrome over teh gray plastic ? I think I'll try for warranty first and then if i dont get a new on ,pull the grill again (ist time for the aircraft landing light install} and try to low all the chrome off. I saw a black av picture here on the club site and it looked fantastic!!!
Yes, I saw that picture too. Not going to try painting it as I think chips would be a problem, but I'm going to check with the 3M automotive shop here and see what they may have.
 
Hey guys... check this out! It's my first pair of Windows that insert into the sail panel. pretty cool huh? :eek: :eek: :eek:

Any Questions?
 

Attachments

  • MyAvSail4.jpg
    MyAvSail4.jpg
    26.1 KB · Views: 190
BIGRED_Z-71 said:
Hey guys... check this out! It's my first pair of Windows that insert into the sail panel. pretty cool huh? :eek: :eek: :eek:

Any Questions?

Yea....

1. Where did you get them?
2. How much did they cost?
3. How hard was the install?



 
answers...

1. I made them.. hehe.
2. around 50 Bucks...
3. you can install them useing 3 nuts... so easy.

~BIGRED
 
big red z-71 yyeah man the look like they came from the factory. I put mine in about christmas, I have posted about my way of making the windows and have mailed a few templates the template is pictured on another post.. I just siliconed the 1/8 smoked plexi in from the bed side. the plexi lays up against the lip I can pull them and rub the silicone off with my finger if I need to. I guess somebody could swipe em?? I paid 40$ for the pair snd 5bucks for a tube of silicone.. First I held them in with tape, put 4 1 inch beads to hold them in place and the next morning put a nice thin bead all around no holes nowhere Its a cool mod and one of those that nobody notices cause it looks like it belongs keep n modding I get new ideas everyday and have three or four in progress right now
 
forgot a picture and was going to get one today but digicam needs batteries
 

Attachments

  • IM000005.jpg
    IM000005.jpg
    81.8 KB · Views: 185
Come on Big R how did you make them can you post pictures on how they look from the inside.
 
HeavyD said:
Come on Big R how did you make them can you post pictures on how they look from the inside.

Cool Exhaust. Did you do it yourself? How? Send me details on your exhaust. I wanna do it!!! >:D
 
here is a photo of the hardware....


~BIGRED
 

Attachments

  • MyAvsailinside.jpg
    MyAvsailinside.jpg
    42.1 KB · Views: 148
BIGRED:

Would you consider making them as a kit for club members. You could sell them using PayPal and I'd set you up in the club store. If your material cost is $50 I'd say that a fair selling price for a completed kit that you just install would be $80 to $95 - depending on how much time it takes for you to fabricate the pieces.

I'm sure there are folks that would buy them.

Another question - would you consider writing a CAFCNA story on how to do it - $25 is on the table if you do it!
 
I'm in if you make a kit... I am not very crafty in making things like those but would be interested in buying a set.
 
chief, I will be sending you a private message in a few hours, i need to get a few more made befor i start taking orders. i'll need to ask a few questions too.

~BIGRED
 
if your are really serious in buying a pair of these windows... can you send me a e-mail or a message. I need to add up how many people are interested in buying them. thanx alot.

BTW this is my 100th post :eek:

~BIGRED
 
Back
Top