• If you currently own, previously owned or want to own an Avalanche, we welcome you to become a member today. Membership is FREE, register now!

Selector cable issue

Birddog803

New Member
Joined
Aug 17, 2020
Messages
7
help

I have been trying to figure out a selector cable issue. I recently did a 4L60E to 4L80E swap i have been wrecking my brain on research. So i originally had the lower half of the 4L60E selector cable on the 4l80e but for some reason it wouldn't go into low gear then i got a lower selector cable for the 4l80e now this one is seems to be to short. Does anyone have information or has delt with this before. At this point im considering cutting and welding the paw please help
 
The only thing I can think of is using a cable from a 2500 suburban 07-08. They came with 4l80e and 6.0l
 
I tried that as well, i have an 4l80e selector cable on it now and the issue im having is when its in park is reads park on the dash when its in reverse nothing neutral nothing drive nothing 3 nothing 2nd yes on the dash but its really in low gear its not properly indicating what gear its in. I have changed the selector switch and i have adjusted it multiple times nothing is working. Now heres the kicker when i take the selector cable off it reads park, 3, 2, 1 on the dash. its not making any sense to me
 
Back
Top