GT
Full Member
Well you can at least get an idea of the sound of my latest setup from this vid. http://www.youtube.com/watch?v=Cx9zefG2q2E This is true dual 3" pipe with an "H" connection, catless with a pair of FM Super 50s.
Will have to make an idle vid when I get the rear end and driveshaft back together. In my opinion it did not get any quieter than with the previous FloPros or the long case Magnaflows(once the packing blew out of them). Both the FloPros and Super 50s are chambered designs..no packing. The Magnaflows were straight thru with packing.
I would say idle is the same or louder with the Super 50s, but 1500-2000 RPM drone is less. Although drone is relatively mild with all of these there seems to be a certain RPM where it is the greatest, then it tapers off again above that.
Will have to make an idle vid when I get the rear end and driveshaft back together. In my opinion it did not get any quieter than with the previous FloPros or the long case Magnaflows(once the packing blew out of them). Both the FloPros and Super 50s are chambered designs..no packing. The Magnaflows were straight thru with packing.
I would say idle is the same or louder with the Super 50s, but 1500-2000 RPM drone is less. Although drone is relatively mild with all of these there seems to be a certain RPM where it is the greatest, then it tapers off again above that.