Stock Ride Height

[NYCBlueZ71]

I've looked through the leveling threads and I cant find out the measurements for a stock truck. I'm trying to bring my av back to its stock stance.

Could someone please tell me what the stock ride height difference is between the front and rear?

-Top of rear tire to wheelwell?
-Top of front tire to wheelwell?

How much difference in the torsion bars is ok?

Thanks,

Rob

 

[marc_w]

If I remember correctly....

Measured from the flat section of fender, to the ground... inline with the axle of the particular wheel....

36" in the front, high 38 to 39" in the rear.

My t-bar adjusters are varied GREATLY. ?I'm not sure how much is good or bad. ?I'm thinking of returning it to stock adjustment and bringing it back to the dealer all lopsided to make them fix it their way. ?The drivers side is almost all the way in, the other is almost all the way out.

EDIT: ?Oh yah - I had 35psi in the tires, all bed panels installed, and 3/4F on the gas gauge... ?

 

[NYCBlueZ71]

so it should be about 3" of difference? Even if it rests on the bumper stops?


-Rob

 

[ygmn]

Well I have a Z66 and when it stops raining I will go measure but by the sound of the rain that could be next week

 

[marc_w]

Yeah, from what I hear, the rubber stops are part of the suspension system - they offer a little progressive feeling to the suspension as it flexes, and then act at the bump-stop when necessary...