• If you currently own, previously owned or want to own an Avalanche, we welcome you to become a member today. Membership is FREE, register now!

Torque Setting on sway bars,front struts and lower control arm for 09 LT 2wheel drive

Inferno Mike

New Member
Joined
Jul 10, 2019
Messages
6
Hello all,going to install a lift kit on my Avalanche,wanting to know what to toque my struts,lower control arm and sway bar. Appreciate the help.
 
Good luck on the project!

Fastener Tightening Specifications:

Brake Hose Bracket Bolt 9 N.m 80 lb in
Brake Hose Clip Bolts 12 N.m 106 lb in
ESC Sensor Bracket Bolt 25 N.m 18 lb ft
Hub and Bearing Assembly to Steering Knuckle Bolts 180 N.m 133 lb ft
Lower Ball Joint Stud Nut 110 N.m 81 lb ft
Lower Control Arm to Frame Nuts 175 N.m 129 lb ft
Shock Absorber Module to Frame Nuts 50 N.m 37 lb ft
Shock Absorber Module to Lower Control Arm Bolt 50 N.m 37 lb ft
Shock Absorber Tenon Nut - 1500 Series 50 N.m 37 lb ft
Shock Absorber Tenon Nut - 2500 Series 24 N.m 17 lb ft
Shock Absorber to Lower Control Arm Bolts - 2500 Series 25 N.m 18 lb ft
Stabilizer Shaft Insulator Clamp Bolts 50 N.m 37 lb ft
Stabilizer Shaft Link Nuts - 1500 Series 23 N.m 17 lb ft
Stabilizer Shaft Link Nuts - 2500 Series 14 N.m 124 lb in
Suspension Position Sensor Bolt 12 N.m 106 lb in
Upper Ball Joint Stud Nut 50 N.m 37 lb ft
Upper Control Arm to Frame Nuts 190 N.m 140 lb ft
Wheel Drive Shaft to Front Hub Nut 240 N.m 177 lb ft
Wheel Speed Sensor Mounting Bolt 18 N.m 13 lb ft
 
Would not the lift kit company tell you?
 
Would not the lift kit company tell you?
All they would say was set at factory spec,all of the information I get here is more informative and a pleasure to read. Shout out to BainMan appreciate the info man.
 
Back
Top