• If you currently own, previously owned or want to own an Avalanche, we welcome you to become a member today. Membership is FREE, register now!

Torque specs for front end

On3go

Full Member
Joined
Nov 18, 2019
Messages
42
Hello all, does anyone have the torque specs for the front suspension? Specifically the strut nuts? I'm not finding much online, and before I buy a service manual, I figure id ask around on here first. Thanks for any help

Vehicle is a 2013 LTZ
 
New shocks? What are you replacing with?

Fastener Tightening Specifications:
Brake Hose Bracket Bolt 9 N.m 80 lb in
Brake Hose Clip Bolts 12 N.m 106 lb in
ESC Sensor Bracket Bolt 25 N.m 18 lb ft
Hub and Bearing Assembly to Steering Knuckle Bolts 180 N.m 133 lb ft
Lower Ball Joint Stud Nut 110 N.m 81 lb ft
Lower Control Arm to Frame Nuts 175 N.m 129 lb ft
Shock Absorber Module to Frame Nuts 50 N.m 37 lb ft
Shock Absorber Module to Lower Control Arm Bolt 50 N.m 37 lb ft
Shock Absorber Tenon Nut - 1500 Series 50 N.m 37 lb ft
Shock Absorber to Lower Control Arm Bolts - 2500 Series 25 N.m 18 lb ft
Stabilizer Shaft Insulator Clamp Bolts 50 N.m 37 lb ft
Stabilizer Shaft Link Nuts - 1500 Series 23 N.m 17 lb ft
Suspension Position Sensor Bolt 12 N.m 106 lb in
Upper Ball Joint Stud Nut 50 N.m 37 lb ft
Upper Control Arm to Frame Nuts 190 N.m 140 lb ft
Wheel Drive Shaft to Front Hub Nut 240 N.m 177 lb ft
Wheel Speed Sensor Mounting Bolt 18 N.m 13 lb ft
 
Last edited:
You are a life saver! Thank you! I'm just freshening up the front end with some new struts as I install a leveling kit I have.
 
Back
Top