• If you currently own, previously owned or want to own an Avalanche, we welcome you to become a member today. Membership is FREE, register now!

TORSION CROSSMEMBER PART NUMBER

cadboy1

SM 2010
SM 2009
SM 2008
SM 2007
SM 2006
SM 2005
SM 2004
SM 2003
Full Member
Joined
Jun 20, 2002
Messages
5,901
Location
Marathon, NY
Does anybody have a part number for the torsion bar crossmember ? My rusted so bad that the key holder tore through the bottom on one side and unloaded the bar and dropped me on the bump stop. Seems the HD truck units are available but can't find a number for the Avalanche, specifically the 2500, if they are different.
 
This is the one I found with an old PN in a parts list for my 2002, can't guaranty because GM parts websites say it doesn't fit but it looks like the right one for a 2500.. PN 15036452

Same site says the 15769710 does not fit the Avalanche, but says it fits the 2500 Suburban.. The one in the picture looks different than the one on mine, looks taller and mine doesn't have the three oval holes in the middle. I know the HD frames are 2 inches taller than the standard 2500 frames, pictures aren't always of the actual part.. I would probably order the 15069710 and send it back if it doesn't fit and then order the other one..

You may need the two mounts that connect it to the frame also.. I can't find those other than on ebay, but again no PN for the Avalanche..

Good luck



 
Last edited:
4 15769710 07.105 SUPPORT, TORS BAR (INCLS 1,3,21,22) (INCLS LINK, LABEL, SPACER) (Service Lane Part) CK1,2 (MN8,MT1,MW3) (EXC HVY) 2002 - 2004 01 3E 0225A
This fits 02-04 3/4 non HVY
I am a GM parts guy.
Randys wrong about the Sub thing
AV 2500 are not a truck 2500 with the HVY option.
 
15036452 SUPPORT, TORS BAR (CROSSMEMBER) (Service Lane Part) K2,3 4-SPD AUTO TRANS (MT1),5-SPD M/TRANS (MW3),TWO INCH BODY RAISE I.D. (HVY) 2001-2004 01 121.73 3E 0225A
This is for trucks 3/4 and 1 ton with HVY
AV did not have the bigger frames like the truck.
 
Did you read my post?? I said I would order the 15769710.. GM parts web sites are very unclear on ordering parts for the Avalanche..
 
Last edited:
Did you read my post?? I said I would order the 15769710.. GM parts web sites are very unclear on ordering parts for the Avalanche..
Cool, just trying to help and make sure you get the correct one:)
 
GM parts overstock, I ordered it then received an email they don't have it :(
 
Probably no longer available unless there's one sitting in the back room somewhere. Best bet is the salvage yard..

Good luck
 
I ended up buying used off ebay and one from a Silverado HD fit perfect. Looks mostly the same except the Silverado has Swiss cheese holes so I save some weight 😂
 

Attachments

  • IMG_20220614_200438244.jpg
    IMG_20220614_200438244.jpg
    168 KB · Views: 6
Back
Top