jwhite8055
New Member
- Joined
- Aug 24, 2021
- Messages
- 3
I usually do a little research, run a few tests and arrive at the Ah-Ha! moment, but I'm stumped,confused even. The problem I have is that the Left Front turn signal isn't working, the rear turn signals work (both bulbs), with the hazard switch on, the flash is normal speed -in the rear, front left doesn't work, activating the left turn signal causes the typical fast-flashing in the left rear. Normally this might indicate a bad bulb, or even a bad ground. Neither is the case here. This leads to the BCM as the culprit. The kicker, is that I have an Autel diagnostic tool capable of reading live data from the BCM - no trouble codes are set- Live data shows the (switch)-input and (power)-output, signals are working for the left front, BUT the left rear is inactive! ANY ideas why this could possibly be?