• If you currently own, previously owned or want to own an Avalanche, we welcome you to become a member today. Membership is FREE, register now!

What mods will you be doing in Laughin

dunes_av

SM 2003
Full Member
Joined
May 31, 2003
Messages
4,185
Location
Arizona
If anyone has any mods they want to do while in Laughlin tell us here, we can then verify how many mods, what kind of mods, and if we will have time to aid everyone.... :B:
 
If I get the chime-killer figgered out......

Too many, so little time. :6:
 
I'd be interested in doing the all 4 lights on at once mod on my 2002 2500 SOM. It sounds fairly easy but I can never seem to find time to get it done. This GTG would be a perfect time.

Also expecting to get some new decals for Christmas, so I may put them on during this trip.

This will be my first GTG, just got my Av about 3 months ago so I'm eager to see what everyone else has done to their AVs. Should be a lot of fun!
 
lifeisforfun2004 said:
This will be my first GTG, just got my Av about 3 months ago so I'm eager to see what everyone else has done to their AVs. Should be a lot of fun!

Well be sure to bring a bib or plenty of napkins! You're liable to start drooling. (y)
 
I did an all-4-on brake mod.. Worked great! Anybody for that (if you have trailer wiring already), bring about 10' of single-wire loom (3/16"), 5' ea. green and yellow wire, (A few crimp connectors & Scotch connector sealer if you're not soldering it.), ty-raps and electrical tape. No diodes needed for this one.
 
;D Am gonna have a smoked bug guard, smoked vent visor (need new double sided tape), and a roll of carbon fiber decal material 15" X 9.5' all for best offer. Will bring to the GTG. :B:
 
How many (03 & later) want the (door only) chime-killer?

Of those, who has memory-seats?

Edit: Forgot something... as usual.
 
I'm gunna' mod my pockets with the MO' MONEY MOD at the craps table. Does that count?

I would like to do the all four on mod if I don't get it done this coming weekend.

:cool:
 
Zuler said:
I'm up for the DRL and all4. I'm gonna try the door ding killer this week.

If you don't get around to it, bring the goodies that were in the post.

If you don't have memory seats, it's only tools.
If you do, you need to run some wire and get the alarm magnetic reed switch.
The double-sticky tape isn't very good and hot glue leaves a medd, but the magnet in the door is holding position. The reed switch just stays close where it is, but the double-sticky didn't hold.

I can't locate more 3/16" loom (yet), the smallest I have left is ?".
I  use 3/16 for the all four brake lights mod also.

Someone bring a strong clean creeper if they want to do the brake-light mod! >:D

 
RIKrotorhead said:
I'm gunna' mod my pockets with the MO' MONEY MOD at the craps table. Does that count?

I would like to do the all four on mod if I don't get it done this coming weekend.

:cool:

You need HID's or 9012's for those darker lights!
 
sperry said:
RIKrotorhead said:
I'm gunna' mod my pockets with the MO' MONEY MOD at the craps table. Does that count?

I would like to do the all four on mod if I don't get it done this coming weekend.

:cool:


You need HID's or 9012's for those darker lights!

Raiderdude ordered our 9012's a couple days ago. Mine aren't as dark as his. I didn't notice much difference at all, but I want the 9012's anyway.
 
;D Grey,  Have that alternator ordered you have been salivating over.  Are there any special electrical parts needed for the swap? :cool: It's a 145 amp Delco unit. :B:
 
lockcop said:
;D Grey,? Have that alternator ordered you have been salivating over.? Are there any special electrical parts needed for the swap? :cool: It's a 145 amp Delco unit. :B:

Yeah Yeah Yeah.... I am still needing to do my alt swap....

over the winter it has not big a big deal as my fans have not been running much.... but before summer hits again I will need to do it....

Grey
 
Id like to do the full time drl's on my 04. What do i need to bring or do? I also have a carbon fiber gauge cluster I need to install, has anyone done this yet? I'd be willing to help anyone out will their mods for some help on mine.
 
Rik, Yeah, I want a set of 9012's also but I didn't see a method I feel comfortable with for payment. I call-in orders. I won't even type in my CC#'s on my stand-alone/offline computers!

So If they work out, maybe another method via a GrpBuy or something. I hope he gets those before the GTG so we can compare them. I'll order three - even if they are $30 each!
 
spavy66 said:
Id like to do the full time drl's on my 04. What do i need to bring or do? I also have a carbon fiber gauge cluster I need to install, has anyone done this yet? I'd be willing to help anyone out will their mods for some help on mine.

The cluster is easy, but you need the Xfer. Maybe there's a speedo shop in the area? Do you have a mileage/EngHrs door tag? Maybe you can do the Xfer later, after you see how easy the cluster is to remove.

Grey is fast with the UBEC version of the all4onHi & FtDRL. I have an under dash version. (Both are the same electrically.) I made up four sets of diodes - FtDRL's and All4OnHi for four Av's. I have plenty of diodes for more if need be.
 
Back
Top