loudernu
Full Member
Ok, I browse the forum a lot, but do nto post too often. I had a decent system in my 2002, but have gutted everything to start my biggest and hopefully "last" build for awhile. Here is a rundown of what is already bought, and going to be installed:
JVC Arsenal KD-813A bluetooth head unit
Rockford Fosgate 3sixty.2 processor
Crescendo Audio 1000c4 4 channel amp for tweeters (upgrading this to the new 1100.4)
Crescendo Audio 1600.2 2 channel amp for the mids
8 Crescendo Audio CTS-1 tweeters, 4 in each A pillar
8 Crescendo Audio MP6 6.5" mids, 4 in each front door
Custom fiberglassed A pillars and front door panels by Epicenter Designs in Florida
2 15" RE Audio MT subwoofers, rebuilt with DC Audio Level 5 recones
Built subwoofer box, 10 cubic feet, tuned to 30 Hz, with a custom midgate. Everything is built double layered birch plywood, so everything is 1.5 inches thick, fiberglass resined, and rhino lined.
SounDigital SD16kd amp, running 4 ohms daily and 1 ohm for competitions
4 spools of Shok Industries 1/0 gauge wire
1 spool of Shok Industries 12 gauge speaker wire
50 feet of Shok Industries 8 gauge (for wiring up the subs)
2 spools of Shok Industries 4 gauge
DC Power Inc. dual alternator bracket, and DC power 260sp alternator along with stock alt(for now) powdercoated to match my truck
XS power d3400 under the hood
4 RPS High Rate UPS batteries in the bed
...and I think lastly, haha, custom aluminum buss bars and amp inputs from Toolmaker Metalwerkz.
I will post pics ad the build progresses, but the panels are in Florida, most of my gear is in the garage, just waiting to get days off and good weather to start this beast.
If anyone thinks I am lacking in an area, or can offer advice, please post away!
JVC Arsenal KD-813A bluetooth head unit
Rockford Fosgate 3sixty.2 processor
Crescendo Audio 1000c4 4 channel amp for tweeters (upgrading this to the new 1100.4)
Crescendo Audio 1600.2 2 channel amp for the mids
8 Crescendo Audio CTS-1 tweeters, 4 in each A pillar
8 Crescendo Audio MP6 6.5" mids, 4 in each front door
Custom fiberglassed A pillars and front door panels by Epicenter Designs in Florida
2 15" RE Audio MT subwoofers, rebuilt with DC Audio Level 5 recones
Built subwoofer box, 10 cubic feet, tuned to 30 Hz, with a custom midgate. Everything is built double layered birch plywood, so everything is 1.5 inches thick, fiberglass resined, and rhino lined.
SounDigital SD16kd amp, running 4 ohms daily and 1 ohm for competitions
4 spools of Shok Industries 1/0 gauge wire
1 spool of Shok Industries 12 gauge speaker wire
50 feet of Shok Industries 8 gauge (for wiring up the subs)
2 spools of Shok Industries 4 gauge
DC Power Inc. dual alternator bracket, and DC power 260sp alternator along with stock alt(for now) powdercoated to match my truck
XS power d3400 under the hood
4 RPS High Rate UPS batteries in the bed
...and I think lastly, haha, custom aluminum buss bars and amp inputs from Toolmaker Metalwerkz.
I will post pics ad the build progresses, but the panels are in Florida, most of my gear is in the garage, just waiting to get days off and good weather to start this beast.
If anyone thinks I am lacking in an area, or can offer advice, please post away!