• If you currently own, previously owned or want to own an Avalanche, we welcome you to become a member today. Membership is FREE, register now!

Minimalist Fender Flares.

A

adamer

Full Member
Joined
Feb 6, 2016
Messages
50
Location
Poland
Searching internet I found pictures of nice fender flares. Pictures are from other Avalanche forum.
I?ve try to register there to ask about this flares, but until now administrator don?t approve me ;-(
Did anybody know where can I buy them?
They are perfect to make cladding look ?complete?.
My Chevy is from 2004, so I would need them in dark grey.
I can see that Top Gun have them as well in light grey.
 

Attachments

  • rearfender.jpg
    rearfender.jpg
    17.9 KB · Views: 178
  • mytruck 3.jpg
    mytruck 3.jpg
    20.2 KB · Views: 175
They are the FRONT FENDER EXTENSION from a AVy 2500.
Cut to fit the rear.
See the many of threads on here:

http://www.chevyavalanchefanclub.com/cafcna/index.php/topic,7486.msg90371.html#msg90371
 
Thanks ygmn. That?s a lot of posts about, but still searching for current not expensive source of it.
Ideally will be from the scrap yard ;-)
 
adamer said:
Is . still on the forum? He use to deal with this fenders...
Click to expand...

NO.

They are a GM part for the front so you can get them anywhere GM parts sold.

then others just cut them to install in the rear

http://www.gmpartsdirect.com/chevrolet/avalanche-2500/15076368/2002-year/base-trim/8-1l-v8-gas-engine/body-cat/exterior-trim-fender-scat/?part_name=flare&position=right

2002 versions = light grey
http://www.gmpartsdirect.com/chevrolet/avalanche-2500/15076368/2002-year/base-trim/8-1l-v8-gas-engine/body-cat/exterior-trim-fender-scat/?part_name=flare&position=left



 
Tkanks again ygmn. I guess that ovners of Avalanches from 2003 onwards just paint them with structural paint.
 
Yeah. I found on the forum that Enkei is distributing them, but can't get in touch with him.
When sending private message I'm getting message that he block me ??? :-(
 
Can anyone recommend any good aftermarket fender flares for a 2004 Z71?  I have the start of some minor surface rust on the rear, was going to grind it off, sand, primer and then seal it to stop the "bleeding".  I am not a good car painter and don't really have the right tools to do the job correctly, I would be fine with adding some additional fender flares if I could find them to cover it up.  The ones mentioned above would work but I really need them to cover the top inch or two above the fender edge.  Does anyone out there know of such an animal?
 
if you have lower cladding one member used a set from a dodge


http://www.chevyavalanchefanclub.com/cafcna/index.php/topic,26085.msg2104936.html#msg2104936
 
My cladding is complete now ;-) I've got them from Enkei who is still distributing them.
They fit perfectly color  is slightly lighter, but that's probably due to different  structure and light reflection.
 
I love mine, Make sure you fasten the rear with some type of metal fastener in at least one hole or you will lose them.
 
Ups, first I couldn't  post picture then post rear twice ; -)
In addition to screws I've  use gel tape. On the rear I've lost square  holes for mounting so I utilize U shaped  glass  holders which I found in my garage mess ;-)
 
You must log in or register to reply here.
Back
Top