Please login or register.

Login with username, password and session length
Advanced search  

News:

Keep CAFCNA Alive! Become a Supporting Member Today!

Pages: [1]   Go Down

Author Topic: Rear wheel frame shield P/N?  (Read 457 times)

0 Members and 1 Guest are viewing this topic.

Jimmi Z

  • Full Member
  • ***
  • Offline Offline
  • Posts: 317
  • 2002 Z-71
Rear wheel frame shield P/N?
« on: July 13, 2019, 19:54:31 PM »

 I notice this was missing appears to been torn off some how, otherside also looks like it could need to be replaced. Anyone ever replaced these, so far no luck finding any info P/N? etc on the net, maybe someone made their own version.

POR-15 doing it's job protecting from rust, been what 16 years now..
Logged
RCD 6 inch lift*Sacchi S9*BFG 315/70/17*SS door handles*SS nerf bars*SS Bull bar*SS Guard*Piaa 520's*Sliverstars bulbs Hi/Lo*Amber DRL's mods*4 brake light mod*4 headlight mod*Dual cargo light switch mods*LOF*Putco Liquid Grill*Remote tailgate lock*Lund SS Bug Guard*Chrome diamond plates*Black painted Cladding*LS1 Electric fans*Heat extractor
scoops*AirLift 1000*Super40*Back-up sensors*Homemade cold air*K&N Filters*3d dome lettering's all 4*Z-71 emblems*Locking billet gas cap*etc

ygmn

  • Administrator
  • Full Member
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • Offline Offline
  • Posts: 33,750
  • Insert Funny Text Here _______________ .
Re: Rear wheel frame shield P/N?
« Reply #1 on: July 14, 2019, 04:25:39 AM »

Maybe make one?
Is it not just a strip of plastic/rubber about 4" tall going accross the inner fender well?

not super critical
Logged
Thread Killer ... After I post they die?
2002 Pewter Z66 - Sept 2001
CAFCNA Album
LSU BABY!
YANKEES BABY!
SAINTS BABY!

Jimmi Z

  • Full Member
  • ***
  • Offline Offline
  • Posts: 317
  • 2002 Z-71
Re: Rear wheel frame shield P/N?
« Reply #2 on: July 14, 2019, 12:19:56 PM »

Yeah I know but still like to fill the gap, you're right the material is plastic and a small like roofing felt is plastic riveted on to the plastic piece in the center hung on by large square hole next time I will used the small round hole next to it and held on by retainer rivets. Not too many pick your parts junkyards with late model avalanche's and truck's, mostly early models, I would rather have the stock than make your own..Plus where to buy that material..
« Last Edit: July 14, 2019, 18:20:37 PM by Jimmi Z »
Logged
RCD 6 inch lift*Sacchi S9*BFG 315/70/17*SS door handles*SS nerf bars*SS Bull bar*SS Guard*Piaa 520's*Sliverstars bulbs Hi/Lo*Amber DRL's mods*4 brake light mod*4 headlight mod*Dual cargo light switch mods*LOF*Putco Liquid Grill*Remote tailgate lock*Lund SS Bug Guard*Chrome diamond plates*Black painted Cladding*LS1 Electric fans*Heat extractor
scoops*AirLift 1000*Super40*Back-up sensors*Homemade cold air*K&N Filters*3d dome lettering's all 4*Z-71 emblems*Locking billet gas cap*etc

Randy

  • Charter Member
  • Full Member
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • Offline Offline
  • Posts: 2,295
  • I charge more than a buck$
Re: Rear wheel frame shield P/N?
« Reply #3 on: July 14, 2019, 14:24:25 PM »

Shows the right is available, but the left is available on ebay.. Not cheap... There was also a rubber flap that was stapled to this piece in the center, doesn’t show it in the description..

93439834 - Right
93439833 - Left

https://www.gmpartsdirect.com/auto-parts/2002/chevrolet/avalanche-2500/base-trim/8-1l-v8-gas-engine/body-cat/inner-components-scat
« Last Edit: July 14, 2019, 14:37:51 PM by Randy »
Logged
02 2500 Summit White-Loaded, Heated Leather Seats, Sunroof, Pioneer AVIC-Z3 Navigation System with back-up cam, front cam and Blue Tooth. Nelson Tune, UPD/K&N Intake, Dual Magnaflow SS Mufflers and 3" Tailpipes, Powermaster 225 Amp Alternator, Dual Optima Batteries, Full Traction 6" Lift with 305/70/17 Goodyear MT/R's and SSBrakes, Calipers and Rotors, E-Z Down Tail Gate.

More to follow...

22' Velocity Boat powered by 502 BB and Stage III Procharger 750+HP

Jimmi Z

  • Full Member
  • ***
  • Offline Offline
  • Posts: 317
  • 2002 Z-71
Re: Rear wheel frame shield P/N?
« Reply #4 on: July 14, 2019, 16:51:51 PM »

Thanks for finding it but Holy crap $173 and $160 maybe I'll look into making my own if I can find the right material..

Ok Google for lowest price found these for around $86 range..
http://oemcats.com/oem-parts/93439833.html
http://oemcats.com/oem-parts/93439834.html
May order the passenger side,double check driver side plastic piece in good shape only the felt material in the center is bit chew up.
so looks like I need the passenger side only, will find some material for the felt part...
« Last Edit: July 14, 2019, 18:23:52 PM by Jimmi Z »
Logged
RCD 6 inch lift*Sacchi S9*BFG 315/70/17*SS door handles*SS nerf bars*SS Bull bar*SS Guard*Piaa 520's*Sliverstars bulbs Hi/Lo*Amber DRL's mods*4 brake light mod*4 headlight mod*Dual cargo light switch mods*LOF*Putco Liquid Grill*Remote tailgate lock*Lund SS Bug Guard*Chrome diamond plates*Black painted Cladding*LS1 Electric fans*Heat extractor
scoops*AirLift 1000*Super40*Back-up sensors*Homemade cold air*K&N Filters*3d dome lettering's all 4*Z-71 emblems*Locking billet gas cap*etc

ygmn

  • Administrator
  • Full Member
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • Offline Offline
  • Posts: 33,750
  • Insert Funny Text Here _______________ .
Re: Rear wheel frame shield P/N?
« Reply #5 on: July 15, 2019, 04:57:37 AM »

Look in junkyards....
I mean hs to be there on AVYS and maybe Suburbans...
Logged
Thread Killer ... After I post they die?
2002 Pewter Z66 - Sept 2001
CAFCNA Album
LSU BABY!
YANKEES BABY!
SAINTS BABY!

Jimmi Z

  • Full Member
  • ***
  • Offline Offline
  • Posts: 317
  • 2002 Z-71
Re: Rear wheel frame shield P/N?
« Reply #6 on: July 15, 2019, 08:56:46 AM »

I'll give my local pick your part Junkyard a call and see if the have any late model Avalanche's and Suburban's, seems like in my area they all go to some hidden salvage yard not seen by the public seems a bit weird all they have is early models 70,80,90 etc..
Logged
RCD 6 inch lift*Sacchi S9*BFG 315/70/17*SS door handles*SS nerf bars*SS Bull bar*SS Guard*Piaa 520's*Sliverstars bulbs Hi/Lo*Amber DRL's mods*4 brake light mod*4 headlight mod*Dual cargo light switch mods*LOF*Putco Liquid Grill*Remote tailgate lock*Lund SS Bug Guard*Chrome diamond plates*Black painted Cladding*LS1 Electric fans*Heat extractor
scoops*AirLift 1000*Super40*Back-up sensors*Homemade cold air*K&N Filters*3d dome lettering's all 4*Z-71 emblems*Locking billet gas cap*etc

Randy

  • Charter Member
  • Full Member
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • Offline Offline
  • Posts: 2,295
  • I charge more than a buck$
Re: Rear wheel frame shield P/N?
« Reply #7 on: July 15, 2019, 10:09:24 AM »

You can also use this body gap guard kit that's made for this exact purpose. A lot cheaper and does front and rear..



https://www.4wheelparts.com/b/suspension/body-lift-gap-guard/_/N-cm5ie
Logged
02 2500 Summit White-Loaded, Heated Leather Seats, Sunroof, Pioneer AVIC-Z3 Navigation System with back-up cam, front cam and Blue Tooth. Nelson Tune, UPD/K&N Intake, Dual Magnaflow SS Mufflers and 3" Tailpipes, Powermaster 225 Amp Alternator, Dual Optima Batteries, Full Traction 6" Lift with 305/70/17 Goodyear MT/R's and SSBrakes, Calipers and Rotors, E-Z Down Tail Gate.

More to follow...

22' Velocity Boat powered by 502 BB and Stage III Procharger 750+HP

Jimmi Z

  • Full Member
  • ***
  • Offline Offline
  • Posts: 317
  • 2002 Z-71
Re: Rear wheel frame shield P/N?
« Reply #8 on: July 18, 2019, 19:42:58 PM »

Thanks Randy, I was waiting for reply back from salvage yard never did, ok decided to go Daystar got 5% discount with promote code,
will post pictures arrived and installed and give feedback on quality material used..
Logged
RCD 6 inch lift*Sacchi S9*BFG 315/70/17*SS door handles*SS nerf bars*SS Bull bar*SS Guard*Piaa 520's*Sliverstars bulbs Hi/Lo*Amber DRL's mods*4 brake light mod*4 headlight mod*Dual cargo light switch mods*LOF*Putco Liquid Grill*Remote tailgate lock*Lund SS Bug Guard*Chrome diamond plates*Black painted Cladding*LS1 Electric fans*Heat extractor
scoops*AirLift 1000*Super40*Back-up sensors*Homemade cold air*K&N Filters*3d dome lettering's all 4*Z-71 emblems*Locking billet gas cap*etc

Jimmi Z

  • Full Member
  • ***
  • Offline Offline
  • Posts: 317
  • 2002 Z-71
Re: Rear wheel frame shield P/N?
« Reply #9 on: July 27, 2019, 18:25:39 PM »

I Just picked up a bunch of packages today from my friend home address. Daystar at least 5 mm thick rubber and heavy and all the necessary plastic rivets, will install once HVAC controller is done.
Logged
RCD 6 inch lift*Sacchi S9*BFG 315/70/17*SS door handles*SS nerf bars*SS Bull bar*SS Guard*Piaa 520's*Sliverstars bulbs Hi/Lo*Amber DRL's mods*4 brake light mod*4 headlight mod*Dual cargo light switch mods*LOF*Putco Liquid Grill*Remote tailgate lock*Lund SS Bug Guard*Chrome diamond plates*Black painted Cladding*LS1 Electric fans*Heat extractor
scoops*AirLift 1000*Super40*Back-up sensors*Homemade cold air*K&N Filters*3d dome lettering's all 4*Z-71 emblems*Locking billet gas cap*etc

Jimmi Z

  • Full Member
  • ***
  • Offline Offline
  • Posts: 317
  • 2002 Z-71
Re: Rear wheel frame shield P/N?
« Reply #10 on: July 31, 2019, 15:42:30 PM »

Well I finally got around to start installing the Daystar frame guard, and nothing lines up or come close, I tried every positions and I don't see how it suppose to go on, no pictures or anything, so I'm sending it back they're going to send me a prepaid shipping label to my email, just got to print it out and drop it off any UPS store. I'll try the local junkyard again unless someone here has a junked Avalanche willing to pull parts and sell them to me..
« Last Edit: July 31, 2019, 15:44:46 PM by Jimmi Z »
Logged
RCD 6 inch lift*Sacchi S9*BFG 315/70/17*SS door handles*SS nerf bars*SS Bull bar*SS Guard*Piaa 520's*Sliverstars bulbs Hi/Lo*Amber DRL's mods*4 brake light mod*4 headlight mod*Dual cargo light switch mods*LOF*Putco Liquid Grill*Remote tailgate lock*Lund SS Bug Guard*Chrome diamond plates*Black painted Cladding*LS1 Electric fans*Heat extractor
scoops*AirLift 1000*Super40*Back-up sensors*Homemade cold air*K&N Filters*3d dome lettering's all 4*Z-71 emblems*Locking billet gas cap*etc

JVZL1

  • CAFCNA 2019 Premium Member
  • Full Member
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • Offline Offline
  • Posts: 1,977
  • Looking For A Crew Cab Pick UP Drove An AVY
Re: Rear wheel frame shield P/N?
« Reply #11 on: July 31, 2019, 20:08:00 PM »

Have you tried Facebook. There has been some parting out.
If you are near Oregon Craigslist has one. Have you looked local?
Logged
04 4x4 2500 Dark Gray


JV

Jimmi Z

  • Full Member
  • ***
  • Offline Offline
  • Posts: 317
  • 2002 Z-71
Re: Rear wheel frame shield P/N?
« Reply #12 on: July 31, 2019, 20:43:11 PM »

Thanks but I don't do facebook, twitter etc. I  will call the local salvage junkyards around here, if not I might just buy the one side OEM  and bite the bullet at $86.00..
Logged
RCD 6 inch lift*Sacchi S9*BFG 315/70/17*SS door handles*SS nerf bars*SS Bull bar*SS Guard*Piaa 520's*Sliverstars bulbs Hi/Lo*Amber DRL's mods*4 brake light mod*4 headlight mod*Dual cargo light switch mods*LOF*Putco Liquid Grill*Remote tailgate lock*Lund SS Bug Guard*Chrome diamond plates*Black painted Cladding*LS1 Electric fans*Heat extractor
scoops*AirLift 1000*Super40*Back-up sensors*Homemade cold air*K&N Filters*3d dome lettering's all 4*Z-71 emblems*Locking billet gas cap*etc

EXT4ME

  • CAFCNA 2019 Premium Member
  • Full Member
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • Online Online
  • Posts: 3,224
  • ... I saw a DEADHEAD sticker on a Cadillac ...
Re: Rear wheel frame shield P/N?
« Reply #13 on: August 1, 2019, 01:33:15 AM »

Maybe have a look at Car-Part.com.
Logged
2004 Cadillac Escalade EXT, White Diamond, New Shale front seat leather from The Seat Shop. WeatherTech FloorLiner DigitalFit. Powerflow Pro-Fit Splash Guards. Arnott/Bilstein front shocks and rear air shocks with Arnott air compressor kit. Refinish Restorer. SeaFoam. Goodyear (Now Continental) Gatorback belts. Goodyear Assurance CS TripleTred All-Seasons.

ygmn

  • Administrator
  • Full Member
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • *
  • Offline Offline
  • Posts: 33,750
  • Insert Funny Text Here _______________ .
Re: Rear wheel frame shield P/N?
« Reply #14 on: August 1, 2019, 04:34:32 AM »

DUCT TAPE!!
Logged
Thread Killer ... After I post they die?
2002 Pewter Z66 - Sept 2001
CAFCNA Album
LSU BABY!
YANKEES BABY!
SAINTS BABY!
Pages: [1]   Go Up
 

Page created in 0.106 seconds with 25 queries.