• If you currently own, previously owned or want to own an Avalanche, we welcome you to become a member today. Membership is FREE, register now!

1, 1.5 Or 2 DIN

It's a 1.5 DIN.
 
Thank you for the info.

So, what do I need to buy to put a 1 DIN HU in the 1.5 DIN hole? Preferably without using a drill.
 
you need a Metra kit from Circuit City, Besy Buy, or your favorite local audio shop. 15 bucks

heres mine (Alpine 7893)
AV10.JPG

 
Thanks for the info.

Now, if I remove the factory HU and put in a 1 DIN HU from someone else, I have .5 DIN left. Does anyone make anything that is .5 DIN to put in. Like a slim DVD or SLIM CD Player. Maybe a slim XM?
 
avking said:
Thanks for the info.

Now, if I remove the factory HU and put in a 1 DIN HU from someone else, I have .5 DIN left. Does anyone make anything that is .5 DIN to put in. Like a slim DVD or SLIM CD Player. Maybe a slim XM?
I can't remember whom, but someone here has done that with a 1/2 DIN DVD as I recall.
 
Steelheadchaser said:
I can't remember whom, but someone here has done that with a 1/2 DIN DVD as I recall.

Anybody know/remember where to get the 1/2 DIN DVD player?
 
Are most aftermarket HUs going to look like that? It does not look bad, just not very OEM. In your picture, it looks like it sticks out an inch or two. Can you make it flush to give it a little more OEM look?

The Dude said:
you need a Metra kit from Circuit City, Besy Buy, or your favorite local audio shop. 15 bucks

heres mine (Alpine 7893)
AV10.JPG
 
You can mount it flush in there, but I think it looks better like this. If you want, find some color matched paint to the interior, sand the kit down flat and paint it so its smooth
 
Did you have to center it like that, or could you put it at the top or bottom? Maybe leave room for a graphic or sticker.

The Dude said:
You can mount it flush in there, but I think it looks better like this. If you want, find some color matched paint to the interior, sand the kit down flat and paint it so its smooth
 
Back
Top