i need help

[fireman39]

I have 2 autotek mean machine amps. The first a mm1400.1d and the sec a mm75.4. I will be running o guage amp kit to a pos/neg distribution block then to the amps. I am looking at getting a kinetik khc1400 to back up my bass amp instead of a cap. How would I hook that up?

 

[Wind4Energy]

Not quite sure what you are asking.
It looks like just a replacement battery. If you are going to replace your battery just hook it up like your stock battery.
If you are planning on adding it as a second battery you can hook it up in parallel with your stock battery ( + to + and - to engine block ) you can get a remote solinoid to disconnect the batteries from each other.
If you do add a second battery you should replace your stock battery with the same type as your second battery.
Here's some pics of my dual battery set up

 

[Wind4Energy]

And my amp set up
The bottom pic is a close up of the diribution block & 12 farad digital.

Hope this helps
Ken

 

[fireman39]

well i have seen some setups with a battery close to bass amp like a cap so i was just wondering

 

[JT]

I have 2 autotek mean machine amps. The first a mm1400.1d and the sec a mm75.4. I will be running o guage amp kit to a pos/neg distribution block then to the amps. I am looking at getting a kinetik khc1400 to back up my bass amp instead of a cap. How would I hook that up?

Here's some info and wiring diagram for ya'....sounds like a nice system. Don't forget to get us pics!!

http://www.kinetikaudio.com/manuals/khccells.pdf