Ooo La La~

[rclydly]

just got a set of 22s on for my AV!
im happy as a nose picker but it still looks small...
with a slight rubbing on a hard turns.....planning to lower it 3/5
or 2/3... any suggestions?? hey big red are yours bubbing with the lowering kit??!! i got 305/45/22.....

 

[sparky]

Hi, I have the 3/5 and run 20's in non-winter months. With 22's I would suggest that you go with the 2/3. But that is just an opinion.

 

[BIGRED_Z-71]

if my truck had a rear axle and front arms. i would tell you. umm i won't know till about feb 14th... but i'm adding the 3/5 djm drop kit... if my math skills are as good as the A+ 's i get in school, it should work with wheel rub in the last 1.8 % of maxium turn. so just ease the last 4 inches of wheel turning when making u-turns. but then again you have 45's... and that math is for 40's.... so add just a tick to those numbers... but get this... you'll have less rubbing once the truck is lowered. oh yeah and can e see photos of those 22's.... drool.

~BIGRED

 

[rclydly]

hey bigred..from looks of those pictures of your rolled truck i think you can even fit 29in wheels since you dont have a fender or wheelwell to rub against
how bout a naked AV?
sparky ! thanks for your help...your e mail replies helped me make my decision!
i just might be able to get away with 3/5 lowering with some trimming..is it ok to cut away inner fender wells??
i would take some pictures but in tipycal seattle weather my wheels already turned brown....rain..rain...surprise surprise...when will it ever stop??!! next stop billet grills! any ideas?? somebody stop me

 

[Chasman]

You're at the shop taking pics so often Big Red where do you find the time for the A+'s?

I think you're using the roll over as an excuse to do some extra mods!

 

[BIGRED_Z-71]

hey I gots another A+ for ya right here.

lowered 5 inches with 22's.

can you picture it now?


~BIGRED


img width/height tags added by brmiller