The Inputs/outputs On The Amp

[Bisonovich]

I've read this and I'm having a hard time figuring out which wires do what...the pictures were helpful...but they are gone now...can any one send the pics to me...or post them...there's alot of wires behind the glovebox and I'm very nervous about cutting and splicing the wrong wires...it took me 2 days just to decide to drill through the fire wall...

I've got my amp and my 2 subs in the truck but need to hook it up to my stereo...also i have a speaker level input on the amp and was just going to use that...since it's another 17 bucks to get a line convertor and more chance to mess something up...but one more question can i wire all the positive and negatives off of one speaker...esp. like the "sub" output from the factory amp...since it's not being used...I have a standard cd player stock sys on the '02

 

[MI_99XPL]

http://hometown.aol.com/ajstalter/AVpics.html

Maybe this will help. Towards the bottom is the link to the audio connectors pin diagram. I don't think the hotlinks work on the audio page, but you can manually scroll down to see what all the pins in the connectors on the 02 AV audio system are for.

 

[Bisonovich]

just another quick question...does any one have actual pictures of the amp and the exact wires i should splice into to get the speaker level wires and the power on lead to go to my amp...since i am having a hard time trying to remove the wires from the amp...i'd rather just cut into them and splice but i want to make sure i have the right ones...i make a mess when i splice and could seriously mess up my system if i go randomly splicing

 

[Bisonovich]

well i spliced the power wire and got it to work...but the question is which wires should i cut into to get the speakers going...i spliced pink for the power...and that was easy...b/c there's only one pink wire...but there's alot the other colors...i tried cuting into the light green/black and dk blue/white on the other connector but it didn't work

 

[Bisonovich]

well i have a complete working system...including my amp and two subs...i was able to figure out which wires to splice into from this post
Factory AMP bypass
That was brought back into the limelight by Texasex
thanks for the inadvertent help

now i just have to rebuild one of the boxes...rattling is a bad sign right...plus i need atleast some frequency response below 50 hz...and i'm not getting it...i might just listen to my system sitting still sometimes and full frequency isthe way to go...imho

URL made descriptive by moderator