• If you currently own, previously owned or want to own an Avalanche, we welcome you to become a member today. Membership is FREE, register now!

2 to 3 wire tail light conversion

Ski Boy

New Member
Joined
Jun 9, 2020
Messages
6
Ok..so I love my 2008 Avalanche so much that I want to take it back to the UK with me. This leads me to a problem.

I need to convert it to have an amber turn signal. In order to do this I will need to split the stop and turn signals into 2 separate feeds. I have looked at convertors for trailers and the manufactures say this will work but strangely will make the hazard lights inoperable which is no good. I have found other people have done this on other makes by cutting a wire on the steering column and splicing wires in the trunk.

So I know this is a strange request but has anybody converted their truck to a separate turn and stop light or is there anybody who understand the wiring enough to be able to point me in the right direction?

Note. This only need to be done on the rear the front is already amber, although I will need to add a repeater in the fender but this should be straight forward.
 

MS03 2500

PM 2017
PM 2015
SM 2014
PM 2013
PM 2012
SM 2011
SM 2010
SM 2009
SM 2008
SM 2007
SM 2006
Full Member
Joined
Oct 17, 2005
Messages
38,557
Location
Lexington KY
Trailer plug. There is a little more involved with exporting a vehicle though.

Good luck.
 
Top