• If you currently own, previously owned or want to own an Avalanche, we welcome you to become a member today. Membership is FREE, register now!

Cowl Induction Hood

sparky

SM 2005
Full Member
Joined
May 29, 2002
Messages
2,707
Location
Calgary, Alberta ? Canada
I was going to post this under the Ram Air Hood thread but then thought it wasn't really the same thing.
There is a guy who is selling a Cowl induction hood on E-bay right now. He had a single scoop version of a 'plain' air intake version but it was not quite the look i wanted. Would prefer a twin scoop version.
This gentlemen has been very good at responding to questions. He has said that his biggest problem at this point is finding someone to do shipping at reasonable cost. Course this is a huge issue for me. I'll keep looking and see if I can arrange some reasonable frieght.

Cowl Induction Hood
 

txyank1

SM 2007
SM 2006
SM 2005
SM 2004
SM 2003
Full Member
Joined
Sep 6, 2002
Messages
7,462
Location
Austin, TX
If it's an '02-'03 it HAS to be WITH cladding. The WBH hood would be an '03 Silverado hood.
 

sparky

SM 2005
Full Member
Joined
May 29, 2002
Messages
2,707
Location
Calgary, Alberta ? Canada
From my notes back and forth with him, he borrowed a guy's 2002 hood to make the mold for the single scoop and the cowl version. He did not sell the single scoop on e-bay for the price he wanted so gave it to his demo person. His biggest issue right now is shipping and he is working on that.
As I said, send him an e-mail through e-bay he is very prompt in his repies
 

sparky

SM 2005
Full Member
Joined
May 29, 2002
Messages
2,707
Location
Calgary, Alberta ? Canada
OK, OK ;)
I started talking with him right about the time that happened :C: So I bugged the livin bejeezus out of him about what the hood would fit on. He seems quite firm, but it never hurts to have a second source check, how bout you send him a note?
 

Boar-Ral

Charter Member
SM 2010
SM 2009
SM 2008
SM 2007
SM 2006
SM 2005
SM 2004
SM 2003
Full Member
Joined
Feb 14, 2002
Messages
1,585
Location
Leduc, Alberta, Canada
My father's trucking company might be able to ship these from the U.S. but he wouldn't have his trucks make a dedicated run. If they are in the area, it is possible. But I noticed this person is in PA and most of the runs are to GA, NV, or CA. I will mention this to him though.
 

Vortek5300

Full Member
Joined
Jul 10, 2002
Messages
167
02_2500avalanche said:
Finaly >:D I need this hood. Hopefuly the guy straightens out his shipping problems because I want this thing (y)

Alex


hehe, dang alex...i was waiting for you to hop on this post. what took so long? ;D :D ;D
 

sparky

SM 2005
Full Member
Joined
May 29, 2002
Messages
2,707
Location
Calgary, Alberta ? Canada
02_2500avalanche said:
Finaly >:D I need this hood. Hopefuly the guy straightens out his shipping problems because I want this thing (y)

Alex
I suggest you send him a note letting him know you are interested. He was disappointed that no one when for the last one he built which was a single scoop. Not the look I wanted and I have bigger shipping issues than you guys do
 

sparky

SM 2005
Full Member
Joined
May 29, 2002
Messages
2,707
Location
Calgary, Alberta ? Canada
Time for an update on the hood.
I was hoping for more progress but these things take time. I'm just so damn impatient, ?:Flamin:
Here is a link on e-bay to 'my' hood. He asked if it was OK to put it up for viewing. Please keep in mind that this is the mold being preped. I know that this design will not be for everyone, but I think it works for me

Avalanche vented ram fiberglass hood


He mentions in the e-bay listing, but to repeat... The scoops will be functional back to the air box if desired. In addition the vents are functional for pulling hot air out og the engine area. He is putting a water management system in the under side.

In addition to this design he will have a 3" cowl, and the version you will see with this link without the vents, just smooth in the center.
I beleive that I am going to have him paint it locally so as to test the entire process. It will be at least two-three weeks before I will have the hood. Will post any pictures I get of this or other hoods that he is offering.

Post any questions here or send me a message and I'll either have or get you an answer.


shortened url - shc
 

Vortek5300

Full Member
Joined
Jul 10, 2002
Messages
167
this guy seems pretty efficient on manufacturing his hood designs. ?so far, from what i've seen, he's developed the following cowls for our hood:
-camaro SS (i was very interested in this one!)
-2 1/2" cowl
-ram air
-and now this awesome design.

...if these hoods turn out to be bolt-ons (painted option would be a plus) and the whole shipping deal gets hammered down, this guy would be an invaluable asset to our community.

i too spoke with him and he is very efficient in answering emails and such. ?no hassle, perfect almost, except for the price of course. ?but it opted out (chickened out really) until i can justify the $500 to spend without paint.

if all goes well please let us know!!!

p.s. this guy should just have a set price and partner with our community, he'd make a fortune...just a thought :0:
 

Woody

SM 2004
SM 2003
Full Member
Joined
Nov 13, 2002
Messages
409
Location
Anchorage, AK
vortek,

Just to be sure I am reading you correctly... is this guy going to be making you the hood or is he just sending you the design?
 

Gene

Full Member
Joined
Aug 13, 2002
Messages
1,640
Location
Guelph, Ontario, Canada
contact info PLEASE, e-mail address and phone #.

I'm not a member of Ebay, and really do not want to register.

Is someone going to help me out here.


G.
 

FSUGUY

SM 2003
Full Member
Joined
Sep 1, 2002
Messages
2,331
I'm pretty sure this was discussed on another thread and it's the same guy I emailed= TRY:

edscustomglass@yahoo.com

that's all I have.
 

Vortek5300

Full Member
Joined
Jul 10, 2002
Messages
167
Woody said:
vortek,

Just to be sure I am reading you correctly... is this guy going to be making you the hood or is he just sending you the design?

no sorry woody, i opted out entirely. i ran into the ebay post for a design he did with the camaross cowl on our hood, which sold before i got to it. sooo, i emailed the guy, and he was really cool. i told him that i missed the bid entirely and he opted to make another hood, no questions asked. i was on the verge of ordering, but the cost of shipping alone scared me away.

i am still interested, but...$$$ is a huge factor especially when i stil had to have still gotten it painted.
 

sparky

SM 2005
Full Member
Joined
May 29, 2002
Messages
2,707
Location
Calgary, Alberta ? Canada
Gene said:
contact info PLEASE, e-mail address and phone #.

I'm not a member of Ebay, and really do not want to register.

Is someone going to help me out here.


G.
I'm sorry, I've been out all day (and night) I will get the contact info to you... promise
 

sparky

SM 2005
Full Member
Joined
May 29, 2002
Messages
2,707
Location
Calgary, Alberta ? Canada
vortek5300 said:
no sorry woody, i opted out entirely. ?i ran into the ebay post for a design he did with the camaross ?cowl on our hood, which sold before i got to it. ?sooo, i emailed the guy, and he was really cool. ?i told him that i missed the bid entirely and he opted to make another hood, no questions asked. ?i was on the verge of ordering, but the cost of shipping alone scared me away.

i am still interested, but...$$$ is a huge factor especially when i stil had to have still gotten it painted.

Hi, I'm a little confused maybe. Are you saying that he is expesive compared to other options, or that it is just a lot of money (which it is)? I'm asking becasue i found his prices to be lower than anything else I could find.
 

Vortek5300

Full Member
Joined
Jul 10, 2002
Messages
167
sparky said:
Hi, I'm a little confused maybe. Are you saying that he is expesive compared to other options, or that it is just a lot of money (which it is)? I'm asking becasue i found his prices to be lower than anything else I could find.

sorry sparky,

what i wrote didnt come out the way i thought it would. what i meant was that it was alot of money for me. his prices faired quite well to comparisons in the aftermarket hood industry... but i, myself, just i dont have the $$$ for that type of upgrade at the moment, although i luv his work! (y)

sorry again for the confusion there, spark ma' lad.... :cautious:
 

Vortek5300

Full Member
Joined
Jul 10, 2002
Messages
167
gene,

his email address is:

edscustomglass@yahoo.com

and name is Ed Schwartz, sorry that's all i know... :)
 

sparky

SM 2005
Full Member
Joined
May 29, 2002
Messages
2,707
Location
Calgary, Alberta ? Canada
Gene said:
Name and phone # Plzzzzzzzzzz.


G.
Gene, what Votec posted is correct. that said, what i am trying to do with him and the club is organize questions and post answers here. It may be that i know the answer to what you may want to ask him, or other people might have the same question. It would be good if people could post their questions here. I will make sure they get answered. That said, it's a free country (both of them!!) so do as you see fit.
 

Gene

Full Member
Joined
Aug 13, 2002
Messages
1,640
Location
Guelph, Ontario, Canada
Well I did finally get a # for Ed, interesting guy.
We spoke to great lenght and I have commissioned him to built me a unit

Should be done by the time my truck arrives ;D ;D

G.
 

sparky

SM 2005
Full Member
Joined
May 29, 2002
Messages
2,707
Location
Calgary, Alberta ? Canada
Replied to your e-mail a few minutes ago.
That's great on the hood. Who is going to get theirs first??

Picked the truck up this afternoon with whipple and performance tuner.
 
Top